Advantest > U3765
Advantest R3767CG/R3765CG Network Analyzer
The R3765CG/R3767CG network analyzers are vector network analyzers that
incorporate a new RF circuit analysis technique. The measuring frequency
range is from 300 kHz to 3.8 GHz (R3765CG)/300 kHz to 8 GHz (R3767CG).
ADVANTEST's unique high-speed signal processing technology enables a faster
measurement speed. In addition to the basic model, a model with built-in
bridge transmission/reflection characteristic measurement and a model
with a built-in S-parameter test set for forward and reverse measurement
are also available. An optional 3-port test set or 4-port test set can
be added to these models. By installing additional input channels in the
receive section, the multi-port models allow perfectly simultaneous measurement
of two different measurement paths, revolutionizing the measurement efficiency
of multi-port devices.
The 8.4-inch color TFT liquid crystal display allows the waveform display
to be split into four windows.
An independent measurement path can be selected for each window, thus
allowing the simultaneous display of up to eight parameters in four paths.
Analysis of measurement items in a wide range can be completed instantaneously.
By executing 2-port full calibration, measurement speed can be increased
to 0.15 ms per point.
The optional software fixture function makes measurement of normalized
impedances other than 50 O easy. This function converts the impedance
in software, eliminating the need to provide hardware such as an impedance
converter. Furthermore, balanced circuits can be measured and matching
networks such as filters and amplifiers can be simulated using the network
analyzer, making it suitable for wide range of applications.
ADVANTEST's popular BASIC controller function is incorporated in the
analyzer as standard, expanding the analyzer's applications in automatic
For type C, 4 S-parameters can be displayed simultaneously through 0.15
ms/point high speed frequency sweep and 4 channel/8 trace.
Wide dynamic range : 100dB
Program sweep function
Frequency, output level, RBW, and setting time can be set for each segment.
MS-DOS format disk
- Allows programming or data analysis using an MS-DOS PC with an MS-DOS
format FD drive.
- Three disk density types (DD : 720 KB, HD : 1.2MB, HD : 1.4MB)
||Built-in 3-port Test Set
||Built-in 4-port Test Set
||Time Domain Function
||Automatic Calibration Kit