HP 37719A

• ATM test capability up to 2.5Gb/s
• Jitter generation and measurement at all SONET rates from 2.5 Gb/s to 52 Mb/s
• Jitter generation and measurement at all T-carrier/PDH rates: 1.5, 45, 2, 8 and 34 Mb/s
• User definable jitter masks

• Smartsetup

  Not only is OmniBER 719 rugged and portable, its easy-to-use Smartsetup and Smart Tests simplify the installation and maintenance of SONET networks.

  OmniBER 719 lets you start testing with just two key presses! With the tester connected to any signal, simply press the Smart Test key on the front panel, select Smartsetup and the autodiscover wizard identifies the line rate and payload structure of the input signal. For SONET signals, OmniBER 719 also automatically displays all of the J1 trace identifiers, that is 48 J1 identifiers in OC-48. Once the signal structure has been identified it's a simple process to select a channel of interest and to explore further into the payload.

• Concatenated Payloads

  OmniBER 719 provides concatenated payload testing at all levels of a SONET/ATM signal. Concatenated payloads are vital for the rapid testing of high bandwidth paths before they are brought into service. Concatenated payloads are also the recommended worse-case signal for performing jitter tests.

  Remote control for manufacturing applications

  OmniBER 719 is shipped with a set of universal instrument drivers (UID's). UID's provide a suite of graphical function panels which make programming OmniBER 719 easy and fast. There is no need to know about SCPI commands - the commands are generated automatically by setting switches on a graphical function panel. UID's are supported in the following environments:

• LabVIEW
• LabWindows/CVI
• HP VEE
• Visual Basic
• C/C++

  And on the following operating systems:

• Windows 95
• Windows NT
• HP-UX
• Sun Solaris

  Remote control for in-service monitoring

  The Distributed network analyzer software (E4540A) lets you control OmniBER 719 remotely, via modem or LAN, from a PC with a mouse. Changes you make on the virtual front panel are seen at the remote end and key presses made on the instrument are visible on the virtual front panel on your PC. For long term testing, dial in to a remote OmniBER 719 and download results to verify testing is going as planned. Disconnect and reconnect anytime without interrupting testing.

Features:

• ATM test capability to 2.5Gb/s
• OC-48, OC-48c, OC-12, OC-12c, OC-3c, OC-3, OC-1, STS-3, STS-3c, STS-1 testing.
• Protection switching time measurement
• Concatenated payloads at all synchronous rates up to 2.5 Gb/s
• Comprehensive thru mode operation for SONET ring turn-up
• Full overhead access plus overhead sequence generation and capture
• Optical power measurement
• Full pointer sequence generation to GR.253
• Jitter generation and measurement at all synchronous rates (52, 155, 622 and 2,488 Mb/s)
• Jitter testing to Bellcore GR-253, ITU-T G.825, G.958, O.171 and O.172

 

T-Carrier

 

General