HP 6574A
DC Power Supply, 60V/35A
HP 6574A Product Details
These models are 2000 Watt, single output, series pass regulated power
supplies, with front panel and analog programming of output voltage and
current. Up to five front panel settings can be stored in nonvolatile
storage registers for later recall.
Features:
- Analog programming of output voltage and current
- Self-test initiated at power-up
- Electronic calibration from front panel
- Five nonvolatile store and recall states
- User-defined power-on state
- Fan-speed control to minimize acoustic noise
- Auto-parallel of up to five 657xAs
- Overvoltage and overcurrent protection
- Overtemperature protection
Specifications:
|
6574A Specifications
|
|
Output ratings
(0 - 55 deg C)
|
Output voltage: 0-60 V
Output current: 0-35 A
|
|
Programming accuracy
(at 25 deg C ± 5 deg C)
|
Voltage: 0.04% + 60 mV
Current: 0.1% + 25 mA
|
|
Ripple and noise
(from 20 Hz to 20 MHz)
|
Voltage (rms/p-p) Normal Mode: 1.25 mV/11 mV
Current (rms): 25 mA
|
|
Load and line regulation
|
Voltage: 0.002% + 2 mV
Current: 0.005% + 2 mA
|
|
Transient response time
|
<900 us for the output voltage to recover 100 mV
following any change in load from 100% to 50% or 50% to 100% of
the output current rating of the supply.
|
|
Supplemental Characteristics
|
|
Average resolution
|
Voltage: 15 mV
Current: 8.75 mA
OVP: 100 mV
|
|
Output voltage programming response time (excluding
command processing time) system models only
|
130 ms is the full load programming rise/fall time
(10% to 90% or 90% to 10%) with full resistive load equal to rated
output voltage/rated output current.
|
|
Physical Specifications
|
|
Dimensions
|
425.5 mm W x 132.6 mm H x 640 mm D (16.75 in x 5.22
in x 25.2 in)
|
|
Net Weight
|
28.2 kg (62 lbs)
|
|
Shipping Weight
|
31.8 kg (70 lbs)
|
Ordering Information:
Agilent HP 6574A DC Power Supply, 60 Vdc, 35 A, 2000
W
| Agilent 6574A |
DC Non-system Power Supply 0-60V 35A |
| Opt 0B0 |
Delete manual set |
| Opt 1BN |
Mil Std 45662A Calibration Certification |
| Opt 1BP |
Mil Std 45662A Calibration w/ Test Data |
| Opt 200 |
200 V operation (Japan only) |
| Opt 831 |
Line cord, 12 AWG wire size, no plug |
| Opt 832 |
Line cord, 4 mm^2 wire size, no plug |
| Opt 834 |
Line cord, 10 AWG wire size, no plug |
| Opt 841 |
Line cord with NEMA 6-20P, 20A/250V plug |
| Opt 842 |
Line Cord with IEC 309 32A plug |
| Opt 843 |
Line Cord (use opt 841 for Japan) |
| Opt 844 |
Line Cord with NEMA l6-30P, 30A/250V plug |
| Opt 8ZE |
Refurbished equipment (contact Encore) |
| Opt 908 |
Rackmount kit |
| Opt 909 |
Rackmount kit with handles |
| Opt 910 |
Service manual |
|
MetricTest
Solutions
