HP 8114A
Programmable Pulse Generator
HP 8114A Product Details
Today's telecommunications and computer systems increasingly employ devices
such as laser and IR diodes, EEPROMS and flash memories which operate
at higher voltages or currents. The Agilent 8114A delivers fast, clean
positive or negative pulses up to 100 V¹ at frequencies up to 15 MHz.
The pulse generator protects the device through user-definable limits
for voltage, current and duty cycle. Additionally, a TTL input allows
the output to be enabled or disabled. An option is available that allows
the baseline to be adjusted in the range -25 V to +25 V. Hi-Z source into
50-ohm load, transitions <12 ns. Baseline zero V. In 50-ohm/50-ohm mode,
the maximum voltage is 50 Vpp with transitions < 7 ns. The variable baseline
option requires 50-ohm/50-ohm mode.
Features:
- 15 MHz
- 50-ohm/50-ohm max. amplitude 50 Vpp
max. amplitude 100 V (HI-Z/50-ohm)
- max. current 2 A (HI-Z/50-ohm)
- voltage, current, and duty cycle protection
- optional baseline shift of +/- 25 V
Specifications:
(50 Ohm load, 0° to 55° C)
Frequency: 1.00 Hz to 15 MHz
Resolution: 3 digits (best case 100 ps)
Accuracy: 5% + 100 ps
Timing
Delay: 0.00 ns to 999 ms
Width: 10 ns to 150 ms
Transitions (10 to 90% amplitude): < 7 ns
| |
50 Ohm Source |
1 K Ohm Source |
| Amplitude, p-p |
1.00 Vpp to 50.0 Vpp |
2.00 Vpp to 100.0 Vpp |
| Current |
20 mApp to 1.00 App |
40 mApp to 2.00 App |
| Baseline |
0 V +/- 100 mV +/- 0.5% of amplitude |
General
HP-IB
Conformity: IEEE 488.2, 1987, SCPI 1992.0
Environmental
Temperature: 0° to 55° C operating, -40° to 70°C storage
Humidity: 95% RH at 0° to 40°C
Power: 100 to 240 V ac +/-10%, 50 to60 Hz
Consumption: 500 VA
EMC Conformity: CISPR 11, A; EN55011, A; EN50082-1
Size: 426 mm W x 133 mm H x 422 mm D (17 X 5.2 x 16.6 in)
Weight: Net 14 kg; shipping, 17 kg
Recal period: 1 year recommended
Warranty: 1 years
Please refer to data sheet P/N 5064-6335E for details.
Ordering Information:
Agilent HP 8114A 100V / 2A High Power Pulse Generator
| Agilent 8114A |
100V/2A Programmable Pulse Generator |
| Opt 001 |
Var. Baseline and Current Programming |
| Opt UN2 |
Rear- (instead of front-) Panel Connectors |
| Opt 1CM |
Rackmount kit |
| Opt 1CN |
Front-Handle Kit |
| Opt 1CP |
Rackmount and handle kit |
| Opt 1CR |
Rack slide Kit |
| Opt 0B2 |
Additional Manual 08114-91012 |
| Opt 0BW |
Service Manual 08114-91021 |
| Opt 0BV |
Component Level Information Package 08114-91031 |
| Opt 1BP |
MIL 45662A Cal with Test Data |
| Opt UK6 |
Commercial calibration with test data |
| Agilent 8114A |
Calibration Options |
| Agilent 8114A |
Standards Compliant (SC) Options |
|
MetricTest
Solutions
