HP 83592A
Sweeper Plug-In, 10MHz-20GHz
The Agilent 83592A RF plug-in provides a 10 MHz to 20 GHz broadband coaxial
swept frequency source for the Agilent 8350B sweep oscillator mainframe.
Applications include scalar network analysis, serving as a local oscillator
for down-converting high frequency signals, and a stand-alone RF signal
source.
Features:
- High output power
- Excellent harmonic performance
- Low cost of ownership
Specifications:
Range Band 0: 0.01 to 2.4 GHz Band 1: 2.4 to 7 GHz
Band 2: 7 to 13.5 GHz Band 3: 13.5 to 20 GHz Full Band: 0.01 to 20 GHz
Accuracy (25° ±5°C) CW Mode Band 0: ±5 MHz Band 1: ±5
MHz Band 2: ±10 MHz Band 3: ±10 MHz All Sweep Modes Band 0:
±15 MHz Band 1: ±20 MHz Band 2: ±25 MHz Band 3: ±30
MHz Full Band: ±50 MHz Frequency Markers Band 0: ±15 MHz, ±0.5%
of sweep width Band 1: ±20 MHz, ±0.5% of sweep width Band 2:
±25 MHz, ±0.5% of sweep width Band 3: ±30 MHz, ±0.5%
of sweep width Full Band: ±50 MHz, ±0.5% of sweep width Stability
With Temperature Band 0: ±200 kHz/°C, typical Band 1: ±200
kHz/°C, typical Band 2: ±400 kHz/°C, typical Band 3: ±600
kHz/°C, typical Full Band: ±600 kHz/°C, typical With 10
dB Power Change: Band 0: ±200 kHz/°C Band 1: ±200 kHz/°C
Band 2: ±400 kHz/°C Band 3: ±600 kHz/°C Full Band:
±600 kHz/°C With 3:1 Load SWR: Band 0: ±100 kHz/°C
Band 1: ±100 kHz/°C Band 2: ±200 kHz/°C Band 3: ±300
kHz/°C Full Band: ±300 kHz/°C
Output Characteristics:
Maximum Leveled Power:(25°C) Normal: Band
0: 10 mW Band 1: 10 mW Band 2: 10 mW Band 3: 10 mW Full Band: 10 mW Option
002: Band 0: 10 mW Band 1: 7.0 mW Band 2: 6.3 mW Band 3: 5.0 mW Full Band:
5.0 mW Power Level Accuracy: Band 0: ±1.5 dB Band 1: ±1.3 dB
Band 2: ±1.3 dB Band 3: ±1.4 dB Full Band: ±1.5 dB Spurious
Signals: Harmonics and Subharmonics: Band 0: <-25 dBc Band
1: <-25 dBc Band 2: <-25 dBc Band 3: <-25 dBc Full Band: <-25
dBc Output Power Resolution Displayed: 0.1 dB Programmable/Settable:
0.01 dB Minimum Settable Power: -2 dBm Option 002: (-72 dBm with)
Power Sweep Calibrated Range: >12 dB Option 002: >9 dB
Modulation Characteristics:
External AM Frequency Response: 100 kHz, typical
Maximum Input: 15 V Range of Amplitude Control: 15 dB, typical Sensitivity:
1 dB/V, typical Input Impedance: @ 10 kohms External FM Maximum
Deviations for Modulation Frequencies DC to 100 Hz: ±75 MHz 100
Hz to 1 MHz: ±7 MHz 1 MHz to 2 MHz: ±5 MHz 2 to 10 MHz: ±1
MHz Sensitivity (switch selectable) FM Mode: -20 MHz/V, typical Phase-Lock
Mode: -6 MHz/V, typical Input Impedance: @ 2 kohms External Pulse Modulation
Pulse Input: TTL 0.01 to 20 GHz: Square wave modulation up to 30 kHz 0.01
to 2.5 GHz Rise/Fall Time: 15 nsec, typical Minimum RF Pulse Width Internally
Leveled: 1 µsec, typical Unleveled (power set to +20 dBm): 200 nsec
2.5 to 20 GHz Rise/Fall Time: 10 nsec, typical Minimum RF Pulse Width
Internally Leveled: 1 µsec, typical Unleveled (power set to +20 dBm):
100 nsec On/Off Ratio: >30 dB, typical
General Specifications:
Minimum Sweep Time: 10 ms (single band) 25 ms (full
band) Auxiliary Output Rear Panel: 2.3 to 7 GHz Fundamental Oscillator
Output: 0 dBm, nominally Frequency Reference Output: 1 V/Hz (0.01
to 18 GHz) 0.5 V/GHz (0.01 to 20 GHz) ±25 mV RF Output Connector:
Type-N, female Net Weight: 6.0 kg (13.2 lb) Shipping Weight:
9.2 kg (20 lb) Furnished: Operating/service manual
|
MetricTest
Solutions
