HP 83592B
Sweeper Plug-In, .01-20GHz
HP 83592B Product Details
The Agilent 83592B RF plug-in provides a 10 MHz to 20 GHz broadband coaxial
swept frequency source for the Agilent 8350B sweep oscillator mainframe.
Applications include scalar network analysis, serving as a local oscillator
for down-converting high frequency signals, and a stand-alone RF signal
source.
Features:
- High output power
- Excellent harmonic performance
- Low cost of ownership
Specifications:
Range Band 0: 0.01 to 2.4 GHz Band 1: 2.4 to 7 GHz Band 2: 7 to
13.5 GHz Band 3: 13.5 to 20 GHz Full Band: 0.01 to 20 GHz Accuracy
CW Mode Band 0: ±5 MHz Band 1: ±5 MHz Band 2: ±10 MHz Band
3: ±10 MHz All Sweep Modes Band 0: ±15 MHz Band 1: ±20
MHz Band 2: ±25 MHz Band 3: ±30 MHz Full Band: ±50 MHz
Frequency Markers Band 0: ±15 MHz, ±0.5% of sweep width Band
1: ±20 MHz, ±0.5% of sweep width Band 2: ±25 MHz, ±0.5%
of sweep width Band 3: ±30 MHz, ±0.5% of sweep width Full Band:
±50 MHz, ±0.5% of sweep width Stability With Temperature
Band 0: ±200 kHz/°C, typical Band 1: ±200 kHz/°C,
typical Band 2: ±400 kHz/°C, typical Band 3: ±600 kHz/°C,
typical Full Band: ±600 kHz/°C, typical With 10 dB Power Change:
Band 0: ±200 kHz/°C Band 1: ±200 kHz/°C Band 2: ±400
kHz/°C Band 3: ±600 kHz/°C Full Band: ±600 kHz/°C
With 3:1 Load SWR: Band 0: ±100 kHz/°C Band 1: ±100 kHz/°C
Band 2: ±200 kHz/°C Band 3: ±300 kHz/°C Full Band:
±300 kHz/°C
Output Characteristics: Maximum Leveled Power: Normal: Band 0:
20 mW Band 1: 20 mW Band 2: 20 mW Band 3: 20 mW (13.5 to 18.6 GHz) 10
mW (18.6 to 20.0 GHz) Full Band: 10 mW Option 002: Band 0: 15.8 mW Band
1: 14.1 mW Band 2: 12.6 mW Band 3: 10 mW (13.5 to 18.6 GHz) 5 mW (18.6
to 20.0 GHz) Full Band: 5 mW Power Level Accuracy: Band 0: ±1.5 dB
Band 1: ±1.3 dB Band 2: ±1.3 dB Band 3: ±1.4 dB Full Band:
±1.5 dB Spurious Signals: Harmonics and Subharmonics: Band
0: <-20 dBc Band 1: <-25 dBc Band 2: <-25 dBc Band 3: <-25
dBc Full Band: <-20 dBc Output Power Resolution Displayed:
0.1 dB Programmable/Settable: 0.01 dB Minimum Settable Power: -2
dBm (-72 dBm with Option 002) Power Sweep Calibrated Range: >12
dB (>9 dB with Option 002)
Modulation Characteristics: External AM Frequency Response:
100 kHz, typical Maximum Input: 15 V Range of Amplitude Control: 15
dB, typical Sensitivity: 1 dB/V, typical Input Impedance: @ 10 kohms
External FM Maximum Deviations for Modulation Frequencies
DC to 100 Hz: ±75 MHz 100 Hz to 1 MHz: ±7 MHz 1 MHz to 2 MHz:
±5 MHz 2 to 10 MHz: ±1 MHz Sensitivity (switch selectable)
FM Mode: -20 MHz/V, typical Phase-Lock Mode: -6 MHz/V, typical Input
Impedance: @ 2 kohms External Pulse Modulation Pulse Input: TTL
0.01 to 20 GHz: Square wave modulation up to 30 kHz 0.01 to 2.5 GHz
Rise/Fall Time: 15 nsec, typical Minimum RF Pulse Width Internally Leveled:
1 µsec, typical Unleveled (power set to +20 dBm): 200 nsec 2.5
to 20 GHz Rise/Fall Time: 10 nsec, typical Minimum RF Pulse Width Internally
Leveled: 1 µsec, typical Unleveled (power set to +20 dBm): 100
nsec On/Off Ratio: >>30 dB, typical
General Specifications:
Minimum Sweep Time: 10 ms (single band) 25 ms (full band)
Auxiliary Output Rear Panel: 2.3 to 7 GHz Fundamental Oscillator
Output: 0 dBm, nominally Frequency Reference Output: 1 V/Hz
(0.01 to 18 GHz) 0.5 V/GHz (0.01 to 20 GHz) ±25 mV RF Output
Connector: Type-N, female Net Weight: 6 kg (13.2 lb)
Shipping Weight: 9.2 kg (20 lb) Furnished: Operating/service
ma
|
MetricTest
Solutions
