Agilent HP 8514B S-Parameter Test Set, 0.045GHz to 20GHz, 3.5 mm

Several S-parameter tests sets are available for the Agilent 8510C network analyzer for broadband coaxial measurements from 45 MHz to 50 GHz. The Agilent 8514B test set has an architecture that develops a separate reference channel for each incident port. RF switching is done with a built-in electronic switch. For active device measurements, the test set includes the ability to apply dc bias (external) to the test port center conductors. Also available are two 90 dB step attenuators, which allow control of the port 1 and port 2 signal levels.

Features:

• 45 MHz to 20 GHz
• Separate reference channel for each incident port
• Built-in electronic switch
• 3.5 mm connectors

Specifications:

Frequency Range: 0.045 to 20 GHz
Test Ports (port 1 or 2)
Nominal Operating Power Level:
2 to -6 dBm
Connector Type: 3.5 mm, male
Impedance, DC Bias: 50 ohm nominal, 500 mA, 40 Vdc maximum
Attenuation Range (incident signal)
0 to 90 dB, in 10 dB steps

Ordering Information:

Agilent HP 8514B S-Parameter Test Set, 0.045GHz to 20GHz, 3.5 mm