Home   |   Contact Us   |   Shopping Cart   |   Quote Cart  0 items   |   Login
Electronic Test Equipment - MetricTest   Advanced
1.800.417.4370
 

 

Agilent HP 8714B RF Economy Network Analyzer

Features:

  • Integrated transmission/reflection test set and synthesized source
  • Narrowband and broadband detection
  • "Real time" sweep speed (50 ms/sweep)
  • Internal 3 1/2-inch disk drive (LIF/DOS formats)
  • 100 dB of system dynamic range
  • Optional AM delay and cable test capabilities

Specifications:

Type Scalar  
Integral Signal Source YES  
Integral Test Set T-R  
Source Minimum Frequency 300  kHz
Source Maximum Frequency 3  GHz
Source Frequency Accuracy 5  ppm
Minimum Output -5  dBm
Maximum Output 10  dBm
Output Resolution 0.01  dB
Output Accuracy 1.0  dB
Output Impedance 50  ohm
No. of Receiver Channels 1  
Receiver Minimum Frequency 300  kHz
Receiver Maximum Frequency 3  GHz
Minimum Dynamic Range 63  dB
Maximum Dynamic Range 100  dB
Maximum Input 10  dBm
Input Connector Type Type-N(female)  
Programmability/Connectivity  
Interfaces HPIB/RS-232/IEEE-488
Novram setup storage 100
Mass memory (hard/floppy disk) 3.5 " Floppy drive
Print/plot language/format HPGL
Programming Language SCPI
Agilent HP 85032B 50 Ohm Type-N Calibration Kit
Agilent HP 85032E

Calibration Kit, Type N +

 

Agilent HP 85036B Calibration Kit, 75 Ohm
Agilent HP 85036E 75 ohm Type-N Calibration kit
Agilent HP 85039A Type-F 75 ohm Calibration Kit

 

Physical

 
Width 425.00 mm
Height 179.00 mm
Length 514.00 mm
Weight 20.50 kg

Ordering Information:

Agilent HP 8714B RF Economy Network Analyzer

HP 8714B-1C2,Network Analyzer, 300kHz-3GHz

HP 8714B-1C2-1E1,Network Analyzer, 300kHz-3GHz

HP 8714B-1DA,Network Analyzer, 300kHz-3GHz

HP 8714B-1EC-1E1-1C2-1DB,Network Analyzer, 300kHz-3GHz

 010  / Add step attenuator
 0B0  / Delete manual set
 0B1  / Add manual set
 0Q8  / Factory delivered service trai
 100   Fault loc & Struc return loss
 1C2   IBASIC system controller
 1CL   Add keyboard
 1CM   Rackmount kit
 1DA   50 ohms AM Delay
 1DB   75 ohm AM Delay
 1E1   Step Attenuator
 1EC   75 ohms system impedance
 1FP   Recalibration software
 AFN   Add additional 50 ohm cable
 AFP   Add additional 75 ohm cable
 K02   Switching test sets

 



 
 
  Company    |   Contact Us   |   Site Map 1.800.417.4370
 
 
 
 
Copyright©2008 MetricTest. All rights reserved. Privacy & Security