Agilent HP 8901B Modulation Analyzer, 150 kHz to 1.3 GHz
Like the Agilent Technologies 8901A, the Agilent 8901B modulation analyzer
combines the capabilities of several RF instruments to give complete,
accurate characterization of modulated signals in the 150 kHz to 1300
MHz frequency range. It very accurately measures modulation and recovers
the modulation signal, determines RF frequency and meaures RF power. The
major additional capabilities of the 8901B are its improved power-meter
accuracy, its ability to make adjacent-channel power measurements or carrier-noise
measurements (with Options 030 through 037), and its ability to count
audio frequencies and measure distortion on 400 Hz and 1 kHz signals.
Features:
- Measures AM and FM to 1% accuracy
- Adjacent-channel power measurement capability
- Measures RF power with power meter accuracy
- Audio measurement capabilities
Specifications:
RF Input
Frequency Range: 150 kHz to 1300 MHz
Operating
Level: 12 mV rms to 7 V rms
Input Impedance: 50 ohms nominal
Tuning: Manual frequency entry, automatic, or track
Acquisition
Time: (automatic operation):1.5s
Frequency Modulation
Rates: 20 Hz to 200 kHz
Deviations: To
400 kHz
Accuracy: +/- 2% of reading +/- 1 digit, 20 Hz to 10 kHz
rates, 250 kHz to 10 MHz; +/- 1% of reading +/- 1 digit, 50 Hz to 100
kHz rates, 10 to 1300 MHz
Phase Modulation
Carrier Frequency: 10 to 1300 MHz
Rates:
200 Hz to 20 kHz; typically usable from 20 Hz to 100 kHz with degraded
performance
Deviation: To 400 radians
Accuracy: +/- 3% of
reading +/- 1 digit
Amplitude Modulation
Rates: 20 Hz to 100 kHz
Depth: To 99%
Accuracy:
+/- 2% of reading +/- 1 digit, 50 Hz to 10 kHz rates, 150 kHz to 10 MHz
+/- 1% of reading +/- 1 digit, 50 Hz to 50 kHz rates, 10 to 1300 MHz
RF Frequency Counter
Range: 150 kHz to 1300 MHz
Accuracy: +/-3
counts of least significant digit +/- reference accuracy
RF Level (True RMS)
Frequency Range with Agilent Technologies 11722A:
100 kHz to 2.6 GHz
Power Range: -20 to +30 dBm
Selective Power Measurements(Options 030 through 037)
Frequency Range: 10 MHz to 1.3 GHz
Carrier
Power Range: +30 to -20 dBm, 12.5, 25 and 30 kHz filters; +30 to -10
dBm, carrier noise filter
Dynamic Range: 115 dB
Carrier Rejection:
> 90 dB for offsets >/= 1 channel spacing or 5 kHz, whichever is larger
Power Reference
Power Output: 1.00 mW, factory set to +/-0.7%,
traceable to the U.S. National Institute of Standards and Technology
Accuracy:
+/- 1.2% worst case (+/- 0.9% rss) for one year (0 degrees to 55 degrees
C)
Ordering Information:
Agilent HP 8901B Modulation Analyzer, 150 kHz to 1.3
GHz
| Agilent 8901B |
Modulation Analyzer, 150 kHz to 1.3 GHz |
| Opt 001 |
RF Connectors on Rear Panel Only |
| Opt 002 |
High stability Internal Reference |
| Opt 003 |
Connections for External Local Oscillator |
| Opt 004 |
Operation from 48 to 440 Hz Power (temp.<40 degrees C) |
| Opt 021 |
Add Agilent 11722A Sensor Module |
| Opt 030 |
High Selectivity (select only 2 filter options). Includes Option
003 connections for external local oscillators |
| Agilent 8901B |
032 through 037 require Option 030; |
| Opt 032 |
12.5 kHz Filter |
| Opt 033 |
20.0/25.0 kHz Filter |
| Opt 035 |
Cellular Radio Filter |
| Opt 037 |
Carrier Noise Filter |
| Opt 907 |
Front Handle Kit (5061-9690) |
| Opt 908 |
Rack Flange Kit (5061-9678) |
| Opt 909 |
Front Handle & Rack Flange Kit (5061-9684) |
| Opt 910 |
2 sets of Operating (08901-90113) and |
| Opt 915 |
Service Manual (08901-90114) |
|
MetricTest
Solutions
