|
Agilent 8903E
The Agilent Technologies 8903E distortion analyzer provides unparalled
versatility and performance for audio measurements from 20 Hz to 100 kHz.The
8903E combines the functionality of a high performance distortion analyzer,
frequency counter, ac voltmeter, dc voltmeter and SINAD meter into one
compact package. (The 8903E has no source.) For ease of use, most measurements
on the 8903E are made with only one or two keystrokes.
Features:
- Measures distortion, SINAD
- Measures true-rms ac volts, dc volts, frequency
- rms, average, and quasi-peak detection
Specifications:
Distortion
Fundamental Frequency Range: 20 Hz to 100 kHz
Display Range: 0.001% to 100% (-99.99 to 0 dB)
Accuracy:
+/- 1 dB, 20 Hz to 20 kHz; +/- 2 dB, 20 Hz to 100 kHz
Input Voltage
Range: 50 mV to 300 V
Residual Distortion and Noise:(the higher
of)
80 kHz BW: -80 db (0.01%) or 15 uV, 20 Hz to 20 kHz
500
kHz BW: -70 dB (0.032%) or 45 uV, 20 Hz to 50 kHz -65 db (0.056%)
or 45 uv, 50 to 100 kHz
Supplemental Charateristics:
3 dB Measurement
Bandwidth: 10 Hz to 500 kHz
Detection: True rms calibrated
average
SINAD
Fundamental Frequency Range: 20 Hz to 100
kHz
Display Range: 0 to 99.99 dB
Residual Distortion and Noise:
Same as listed under distortion
Accuracy: +/-1 dB, 20 Hz to 20
kHz; +/-2 dB, 20 Hz to 100 kHz
Input Voltage Range: 50 mV to 300
V
Supplemental Characteristics:
Detection: True rms or rms-calibrated
average
Frequency Measurement
Measurement Range: 20 Hz to
150 kHz (20 Hz to 100 kHz in distortion and SINAD modes)
Resolution:
5 digits (0.01 Hz for input frequencies < 100 Hz)
Accuracy: +/-
(0.004% + 1 digit)
Sensitivity: 50 mV in distortion and SINAD modes
Analyzer Input
Input Type: Balanced (full differential)
Input Impedence: 100 k ohms +/- 1% shunted by <300 pF, each side
to ground. (In dc-level mode the input resistance is 101 k ohms +/-1%)
Max Input:(maximum peak input voltage, any combination of ac/dc)
42 V peak, low side to ground 425 V peak, differentially or between either
input to ground
CMRR: > 60 dB, 20 Hz to 1 kHz, V(in) < 2V; > 45
dB, 20 Hz to 1 kHz; > 30 dB, 20 Hz to 20 kHz
Ordering Information:
Agilent HP 8903E 20 Hz to 100 kHz Distortion Analyzer
| Agilent 8903E |
Distortion Analyzer |
| Opt 001 |
Input/Output Connectors on Rear Panel Only |
| Opt 010 |
Left Position 400 Hz High-Pass Filter |
| Opt 011 |
Left Position CCITT Weighting Filter |
| Opt 012 |
Left Position CCIR Weighting Filter |
| Opt 013 |
Left Position C-Message Weighting Filter |
| Opt 014 |
Left Position CCIR/ARM Weighting Filter |
| Opt 015 |
Left Position "A" Weighting Filter |
| Opt 050 |
Right Position 400 Hz High-Pass Filter |
| Opt 051 |
Right Position CCITT Weighting Filter |
| Opt 052 |
Right Position CCIR Weighting Filter |
| Opt 053 |
Right Position C-Message Weighting Filter |
| Opt 054 |
Right Position CCIR/ARM Weighting Filter |
| Opt 055 |
Right Position "A" Weighting Filter |
| Opt 8ZE |
Refurbished equipment |
| Opt 907 |
Front handle Kit (5061-9689) |
| Opt 908 |
Rack Flange Kit (5061-9677) |
| Opt 909 |
Rack Flange Kit (5061-9683) with |
| Opt yes |
|
| Opt 910 |
Additional Operation and Calibration Manuals(08903-90053)and Two
Service Manuals (08903-90065) |
| Opt 915 |
Adds Service Manual (08903-90065) |
|
MetricTest
Solutions
