Agilent HP E4480A 156MTS SONET Maintenance Test Set
The field-portable E4480A 156MTS combines SONET, ATM and T-carrier
test
for installation, qualification, and maintenance test from DS0 to
OC-12. The instrument provides
a wide array of options to support evolving network measurement
needs.
Auto-Setup and Trouble-Scan capabilities quickly synchronize with
complex network
configurations to report errors on a high-contrast display. A full
suite of BER test patterns
with alarm, error and pointer monitoring and generation capability
is included for T-carrier,
clear-channel and ATM payloads.
Features:
- Comprehensive SONET, ATM and T-carrier test from DS0 to OC-12
- Auto-Setup function automatically configures the instrument
to match the incoming signal
- Trouble-Scan function identifies any alarms and errors at the
push of a button
- Extensive array of front-panel LEDs report signal status at-a-glance
right across the hierarchy
- Separate transmit and receive rates for cross-mux testing
- Displays and controls a complete set of SONET overhead, including
the 64byte path trace
- STS-12c and STS-3c clear channel BER tests verify performance
across the full bandwidth
- Cross-cell BER test at up to 100% of bandwidth for stress testing
ATM payloads
- Cell loss, inter-arrival time and transfer delay measurements
for ATM
- Scans the incoming ATM signal and reports the bandwidths of
active VPIs/VCIs
- E1 in DS3 mapping including E1 timeslot testing
- Drop and insert DS1/E1 from DS3 for thru mode testing
- DS3 pulsemask measurements
- In-depth DS1 test capability including in-band and out-of-band
loopcodes
- Tributary jitter measurements at STS-1, DS3, DS1 and E1
Specifications:
| E4480A
Specifications
|
|
|
| Frame Formats
and Mappings: |
|
|
| SONET: |
STS-12/12c/3/3c, STS-1; DS3 and VT1.5 (async or
byte sync) mappings |
| ATM: |
AAL0 and AAL1 |
| DS3: |
M13, C-bit and unframed; DS1 and E1 structured
|
| DS1/FT1: |
D4, ESF, SLC, MBLT and unframed |
| E1/FE1: |
TS0, TS0/16, TS0/CRC, TS0/16/CRC and unframed
|
|
|
| Optical Interfaces: |
622.08Mb/s (OC-12), 155.52Mb/s (OC-3), 51.84Mb/s
(OC-1). 1310nm and 1550nm intermediate and long reach lasers
and interchangeable connectors available. Receive optical power
and frequency measurements. |
|
|
| Electrical Interfaces: |
51.84Mb/s (STSX1/B3ZS), 44.763Mb/s (DSX3/B3ZS),
2.048Mb/s (E1/AMI/HDB3), 1.544Mb/s (DSX1/AMI/B8ZS). Receive
peak electrical level and frequency measurements. |
|
|
| Payloads: |
STS-12c, STS-12c/ATM, STS-3c, STS-3c/ATM, DS3,
DS3/ATM-HEC, DS3/ATM-PLCP, DS3/DS1/DS0, DS3/E1/TS and VT1.5/DS1/DS0
|
|
|
| Drop and insert interfaces: |
STS-1, DS3, E1, DS1, DCC, V/F |
| Timing References: |
Internal Stratum 3, DS1 BITS, loop timing and
external |
|
|
| Internally Generated Patterns: |
231-1 (STS-12c), 223-1,
220-1, 215-1, 211-1, 29-1,
26-1, QRSS, all 1's, all 0's, 3 in 24, 0/1, 55 octet
and programmable user patterns |
|
|
| Jitter Measurements: |
STS-1 to GR-253, DS3/DS1 to GR-499, E1 to ITU-T
G.823, measurement range 0.1-12UI peak-peak, resolution 0.1UI,
accuracy ±5% ±0.05UI, programmable hits threshold |
|
|
|
Alarm Test:
|
|
|
|
| SONET: |
LOS, LOF, LOCLK, AIS-L, RDI-L, LOP-P, AIS-P, RDI-P,
AIS-V, LOP-V, RDI-V |
| ATM: |
LOS Cell sync, SCNR, LOPAT, VP AIS and RDI, VC
AIS and RDI |
| DS3: |
LOS, FFM, OOF, LOP, AIS, CV |
| DS1: |
LOS, OOF, LOP, AIS, Yellow, COFA, Ones density,
CDI (Idle) |
|
|
|
Error Add and Monitor:
|
|
|
| SONET: |
BPV, Frame, B1, B2, B3, REI-L, REI-P, Data, VT1.5
BIP and REI-V |
| ATM: |
HCS, Data, PLCP |
| DS3: |
BPV, Frame, Data, C1, C2, C3, X-bit, FEBE |
| DS1: |
BPV, Frame, CRC, Data |
|
|
|
Overhead Test:
|
|
|
|
| Section: |
Al, A2, C1, E1, Fl and D1-D3 |
| Line: |
K1, K2, D4-12, Z1, Z2, E2 |
| Path: |
B3, C2, G1, F2, Z3-Z5 |
| VT: |
V4, V5 |
|
|
| Pointer Monitoring: |
STS and VT Increment, decrement and new pointer
|
|
|
|
Physical characteristics:
|
|
|
| Dimensions: |
H×W×D inches: 7.5×14.5×l6.0, H×W×D mm: 190×370×405
|
| Weight: |
15lbs, 7kg |
| Power: |
500W Electrical: 100-220Vac 50/60Hz |
| Operating Temperature : |
+32°F to +113°F, 0°C to +45°C |
| Storage Temperature: |
-4°F to +158°F, -20°C to +70°C |
Ordering Information:
Agilent HP E4480A 156MTS SONET Maintenance Test
Set
|
HP E4480A-SYS7,CERJAC 156MTS
Test Set
|
| Agilent E4480A |
156MTS SONET Maintenance Test Set providing STS-1 test |
| Agilent E6322A |
DS3 pulse mask graphic software |
| Agilent E6347A |
Remote front panel software |
| Agilent E6348A |
Remote event logging software |
|
MetricTest
Solutions
