| |
|
Features
Request Quote: 196M
199M
|
|
Fluke 190 Series Medical ScopeMeter¬
For instruments that have the MS190 Software Extension installed,
the full specification for the Fluke ScopeMeter
190 Series applies, with the additions as specified below.
|
|
| Display and acquisition |
Channels displayed: input
A, input B, dual channel
Display modes: smart averaging, normal averaging, selectable
persistence, invert, replay
Smart averaging displays averaged curve; incidental waveforms that
differ too much from the average curve are displayed but do not contribute
to the averaged curve
Averaging factor: selectable: 2x, 4x, 8x, 64x or off
Selectable persistance decay time: short, medium, infinite
or off; can be used with dots only display or with dot join mode |
| Trigger and delay - Video Triggering
|
Interlaced video: NTSC, PAL,
PALplus, SECAM. Selects field 1, field 2, lines or on user selected
line from a frame
Non-interlaced video: for line counts up to 2800 lines per
frame and and video scan rates up to 65 kHz; triggers on fields, on
lines or on user-selected line |
| Cursor measurements |
Dual vertical lines: time
between cursors, voltage between markers, 1/T (in Hz), mVs, mAs |
| Zoom |
Horizontal zoom: Up to 8x
Vertical zoom: using position control (offset) and vertical
sensitivity |
| Offset range |
Max. offset for viewing positive-going
signals: 16 divisions for input sensitivity settings 5ƒ50 mV/div
(50ƒ500 mV/div. when using 10:1 probe or TA190-50R); 8 divisions for
all other vertical sensitivity settings
Max. offset for viewing negative-going signals: 8 divisions
for all vertical sensitivity settings |
|
MetricTest
Solutions
