| |
 |
|
Fluke 190 Series Medical ScopeMeter¬
The Fluke 190 Series Medical ScopeMeters are high-performance oscilloscopes
for the most demanding applications when servicing medical imaging equipment
and video systems. Based upon the Fluke 190 Series ScopeMeters,
the Fluke 190 Series Medical ScopeMeter offers measurement capabilities
optimized for servicing medical equipment in the following modalities:
X-ray, MRI, Nuclear Medicine and Ultrasound.
- Dual input - 100 or 200 MHz bandwidth
- Up to 2.5 GS/s real-time sampling per input
- mAs current-over-time measurement
- Connect-and-View» automatic triggering, a full range of manual trigger
modes plus external triggering
- Video triggering with line selector for standard and high-resolution
video systems
- Smart averaging
- Selectable persistence mode
- 27,500 points per input record length using ScopeRecord» mode
- Automatic capture and replay of 100 screens
- Automatic waveform measurements
- Four hours rechargeable NiMH battery pack
- 1,000V CAT II and 600V CAT III safety certified
- Up to 1,000V independently floating isolated inputs
- Includes a 5,000 counts true-rms multimeter and a TrendPlot» paperless
recorder
- FlukeView Software, Carrying Case and accessories included
mAs Measurement Calculates Current Over Time
Using the cursors, you can now measure directly the amount of radiation
produced by X-ray systems, or the total amount of charge applied to a system.
Click image to enlarge.
Smart Averaging
Smart averaging gives the averaged waveform over successive acquisitions,
reducing noise in the displayed waveform. Thanks to smart averaging, you
can now also see an incidental curve of a different waveshape with no effect
on the averaged curve! This allows you to see the averaged curve of a sequence
of video lines, for example, while still seeing the incidental flyback line
flash by! Thanks to smart averaging, the oscilloscope gives an immediate
response when the signal makes large changes, for instance when probing
around different test points, while retaining the benefits associated with
averaging! Click image to enlarge.
Extended Offset
Vertical offset is now extended to a maximum of 16 divisions, allowing vertical
zoom-in for study of small details of the signal. Click
image to enlarge.
Selectable Persistence
Persistence mode with selectable decay time helps to find anomalies in the
waveshape and optimizes the display for color information when working with
composite color video. Can be used together with dots only mode, best for
modulated signals, or with dot join mode for more continuous and stable
waveshapes.
Extended Video Triggering
Next to its triggering capability for standard, interlaced TV signals, the
instrument now triggers on high-resolution, non-interlaced video systems.
The ScopeMeter 190 will trigger on all lines (non-selective), or can select
an individual video line from systems with up to 2800 lines per frame.
MS190 Software Kit
The MS190 Software kit extends a standard Fluke 190 Series ScopeMeter with
the software functions found in the Fluke 190M ScopeMeter.
MA190 Accessory Kit
The MA190 accessory set enables interconnection of the Fluke 190 for use
in the field of Medical Imaging and Video systems. The kit is included in
the Fluke 190M as a standard.
The accessory kit includes:
- 50 ohm BNC feedthrough terminator, in insulated enclosure, to maintain
proper termination of test connections during measurement.
- 50 ohm BNC terminator with 10:1 signal attenuation; keeps test terminal
properly loaded while getting optimum signal amplitude to benefit from
the instrumentÍs extended offset range.
- 1 ohm current shunt for current measurements, in insulated enclosure.
- safety-designed BNC cable, 1.5 m (5 ft), with plastic connectors for
safe connection to test terminals even when not at ground potential.
- insulated BNC(f) to 4 mm banana plug adapter.
- dual 4 mm banana receptacles (1 red, 1 black).
|
MetricTest
Solutions
