| |
 |
Fluke Networks DSP-2000 Digital CableAnalyzer
- Tests a wide variety of LAN cabling systems: UTP, FTP, STP (IBM type
1, 2, 6, 9), Coax
- Provides fast test times: completes test of a 4-pair Cat 5 cable in
17 seconds
- Stores 1,150 TIA TSB-67 test results and up to 3,000 fiber test results
- Monitors traffic on 10BASE-T and 100BASE-T networks to help you identify
if the cable link is the source of the problem
- Tests a wide variety of LAN cabling systems: UTP, FTP, STP (IBM type
1,2,6,9), Coax
Product Capabilities
The DSP Series of rugged digital cable analyzers is designed for cable
installers and network owners who need to certify high-speed, copper and
fiber cabling to today's industry standards and tomorrow's emerging standards.
DSP-2000 cable analyzers enable you to certify network cabling at the
touch of a button. All models feature Fluke Networks' superior digital
test technology that fully complies with all current test standards. Both
the DSP-2000 CableAnalyzer» and the DSP-100 CableMeter¬ test tools are
classified by Underwriters Laboratories, Inc. (UL) to deliver TSB-67 Accuracy
Level II for the Basic Link and Channel.
The DSP-2000 provides input protection from live ISDN circuits. It tests
NEXT from both ends (to 155 MHz) and can detect and exclude sources of
noise from its measurements - ensuring accuracy. Its rugged construction
makes it perfect for on-site use while its bright, backlit display allows
it to be used in those hard-to-see locations.
With the accompanying, free Windows-based DSP-LINK software you can quickly
and easily upload all cable test results directly to your PC.
DSP-2000 Specifications
|
| Cable Types |
UTP, FTP, ScTP, STP, Coax |
| Test Standards |
TIA Cat 3, 4, and 5 Basic Link or Channel
ISO11801 Class A, B, C, or D
IEEE 10Base5, 10Base2, or 10base-T
IEEE Token Ring 4 Mbps or 16 Mbps
IEEE 100Base-TX, 100Base-T4
IEEE 802.12 (100VG-AnyLan) 4-UTP or 2-STP
ANSI TP-PMD
Aus/NZ Class C, D Basic Link or Channel |
| Speed of Autotest |
Full Autotest of Category 5 UTP cable, including
6 pair combinations for NEXT in both directions, in less than 20 seconds.
|
| Supported Tests |
(Range of test is determined by network or
selected standard)
Wire Map
Length, Propagation Delay, Delay Skew
Attenuation
NEXT, NEXT @ Remote
Power Sum NEXT, PSNET @ Remote
Attenuation-to-Crosstalk Ratio (ACR), ACR @ Remote
Characteristic Impedance
DC Loop Resistance
Return Loss (RL), RL @ Remote |
| Cable Tone Generator |
Tone generator can be detected by a handheld
tone probe. |
| Display |
Graphic bit-mapped LCD with back light and
adjustable contrast |
| Test Connections |
Two shielded 8-pin modular connectors, RJ-45
|
| Input Protection |
Protected against continuous telco voltages
and 100 mA over-current.
Occasional ISDN over-voltages will not cause damage. |
| EMC |
EMC compliant. CE certification by NMi Certin
BV. Number FLK95003.CFT dated on 3-Oct-95. |
| Power |
Main instrument and Smart Remote unit: Rechargeable
NiCad battery with 10-12 hours typical battery life |
| Size |
22.5 x 13 x 7.6 cm (9 x 5 x 3 in) |
| Weight |
1.5 kg (3.25 lb) |
| Languages Supported |
English, Spanish, Italian, French, German,
Portuguese, Chinese, Korean and Japanese |
|
MetricTest
Solutions
