Home >
Fluke > Volt Alert
Fluke VoltAlert» 1LAC/1AC Easy-To-Use Voltage Detectors
Easy-To-Use Voltage Detectors
VoltAlert» ac voltage testers from Fluke are easy to use-just touch
the tip to a terminal strip, outlet, or cord. When the tip glows red,
you know there's voltage in the line. Electricians, maintenance, service,
safety personnel, and homeowners can quickly test for energized circuits
and defective grounds on the factory floor, in the shop, or at home.
Now available in two voltage ranges
The new VoltAlert 1LAC is for detecting control voltage from 24V ac to
90V ac. The VoltAlert 1AC is for detecting line voltage from 90V ac to
600V ac.
The 1LAC is not available in Europe or Australia. The 1AC is not available
in Australia or Sweden.
Features at a Glance:
- Fits in a shirt pocket for convenience
- All outer surfaces are non-conductive for safety
- Detects voltage without metallic contact
- Manufactured, printed and packaged in the US
- Quickly locates the hot, neutral and ground terminals in any receptacle.
(1AC only)
|
|
| Mechanical |
Weight: 40.6 grams with batteries
Dimensions:
146 mm long x 19 mm
diameter (5.75" x 0.75")
Outer surface:
Probe is composed of injection molded
high-impact, non-flammable PVC and ABS
|
| Standards |
CAT III-600V
ANSI/ISA-S82.01-94
IEC 1010-1, 1990
IEC 1010-2-031 |
| Operating Range |
VoltAlert 1AC: 90V ac to
600V ac
VoltAlert 1LAC: 24V ac to 90V ac |
| Operating Temperature |
-10ÁC to 50ÁC (14ÁF to 122ÁF) |
| Humidity |
0ÁC to 30ÁC, 95% (32ÁF to 86ÁF)
30ÁC to 40ÁC, 75% (86ÁF to 104ÁF)
40ÁC tp 50ÁC, 45% (104ÁF to 122ÁF) |
| Operating Altitude |
3000 m (10,000 ft) |
| Enclosure |
IEC 529, IP54 |
| 
MetricTest
Solutions