Fluke Networks 990DSL CopperPro Loop Tester

• Replaces up to twelve traditional test sets
• Troubleshoots and qualifies lines for POTS, ADSL and other special services
• Time Domain Reflectometer (TDR) feature allows precision fault location
• Fast, accurate and easy to use
• Compact, rugged and weather resistant

Product Capabilities

CopperPro is a handheld, multifunction OSP test set.

In its basic configuration, CopperPro offers a broad range of Plain Old Telephone Services (POTS) troubleshooting, fault location and line qualification capabilities. Its Wideband/TDR option adds high frequency transmission testing and qualification functions for services like ADSL, HDSL and HDSL2, ISDN, T1, E1 and DDS. And the TDR feature of the option adds precise fault location and analysis. The Wideband/TDR option can be added at time of purchase or later at an authorized service center.

 

Basic CopperPro
AC Voltage	0 to 250V (1% ± 0.5V accuracy)
DC Voltage (RIN=100 kohms or 10 Mohms)	Range: 0 to 150V (1% ± 0.5V accuracy); 150 to 300V (2% accuracy)
DC Loop Current (430 ohms)	0 to 100 mA (2% ± 0.3 mA accuracy)
Resistance (shorts & grounds)	0 to 100 ohms (0.1% ± 0.10 ohm accuracy) 100 ohms to 1000 kohms (0.2% ± 0.10 ohm accuracy) 4 kohms to 100 Mohms (3% accuracy)
Leakage Stress	2 kohms to 100 Mohms (3% accuracy)
Opens	0 to 3000 ft (1% ± 5 ft accuracy) 3 to 50 kft (3% accuracy) 50 to 80 kft (5% accuracy)
Splits	Range: 0 to 50 kft (Accuracy: 10% of Cable Length)
RFL (RTS = Res. to Strap)	Fault Resistance (Rf): 0 to 30 Mohms Loop Resistance: 0 to 4000 ohms Resistance to Fault (@ Rf = 100 kohms): 0 to 100 ohms (0.1% RTS ± 0.10 ohm); 100 ohms to 4 kohm (0.3% RTS ± 0.10 ohm)
Load Coils	0 to 6 (± 1 accuracy)
Tracing Tone	Frequency: 577.5 Hz (0.1% accuracy) Range: 10 Vp-p > 3.5 (10% accuracy)
VF Noise	Impedance: 600 ohms, Bridged (1% accuracy) Filters: C, CN, 3k, 15k, Psophometric Metallic Noise: 0 to 10 dBrn (± 2 dB accuracy); 10 to 100 dBrn (± 1 dB accuracy) Power Influence: 40 to 120 dBrn (± 2 dB accuracy)
VF Loss	Signal Level: -40 to 10 dBm (± 0.5 dBm accuracy) Frequency: 100 Hz to 20 kHz (0.1% ± 2 Hz accuracy)
VF Longitudinal Balance (0 to 70 dB ± 2 dB)	Disturbing Frequency: 200 to 2500 Hz (0.1% accuracy) Impedance: 600 ohms (1% accuracy) Filters: C, Psophometric
Send VF Tone	Frequency: 100 Hz to 20 kHz (0.1% accuracy) Amplitude (settable) Range: -20 to 3 dBm Amplitude Accuracy: ± 0.5 dB (1 dB increments) Impedance: 600 ohms, 900 ohms (1% accuracy)

 

CopperPro Wideband Option
WB Noise/Level	Impedance Range: 100 ohms, 135 ohms, Bridged (1% accuracy) Filters: E, F, G, None Frequency: 10 kHz to 1200 kHz (0.1% ± 508 Hz accuracy) Amplitude: -50 to 3 dBm (± 1 dB @ 135 ohms); -90 to -50 dBm (± 3 dB @ 135 ohms)
WB Loss	Impedance: 135 ohms (1% accuracy) Frequency: 10 kHz to 1200 kHz (0.1% ± 508 Hz accuracy) Magnitude: 0 to 50 dB (± 1 dB accuracy); 50 to 70 dB (± 2 dB accuracy)
WB Longitudinal Balance (0 to 70 dB; ± 2 dB)	Disturbing Frequency: 10 to 1200 kHz (0.1% accuracy) Impedance: 100 ohms, 135 ohms (1% accuracy) Filters: E, F, G, None
Send WB Tone	Frequency: 10 kHz to 1200 kHz (0.1% ± 508 Hz accuracy) Amplitude (fixed): 0.0 dBm (± 0.5 dB accuracy) Impedance: 100 ohms, 135 ohms (1% accuracy)
WB Impulse Noise	Impedance Range: 100 ohms, 135 ohms, Bridged (1% accuracy) Filters: E, F, G, None Test Time: 1 to 1440 Minutes (1% accuracy) Impulse Counter: 0 to 9999 Counter Threshold: -40 to 0 dBm (± 1 dB accuracy)
ADSL Auto-Test	Impedance: 100 ohms Noise Filters: E, F, G, None ADSL Standard: ANSI, Full, G, Lite
Data Rate Prediction	Resolution: 32 kb/s Downstream Rate Range: 0 to 8192 kb/s Downstream Rate Accuracy: ± 96 kb/s (3 units of resolution) Upstream Rate Range: 0 to 1024 kb/s Upstream Rate Accuracy: ± 64 kb/s (2 units of resolution)

 

CopperPro TDR Option
Impedance	135 ohms (1% accuracy)
Pulse-width	20, 100, 500, 1000, 2500, 5000 ns (10% ± 5 ns accuracy)
Vop Selection	0.300 to 0.999
Range (Vop=0.64)	30,000 ft (9144m)
Range Selection (Auto.)	10 ft to 48 kft (3 to 14630m)
Horizontal Resolution	0.5 to 156 ft (0.1524 to 47.5m)
Distance to Reflect.	Range: 0 to 30,000 ft (0 to 9144m) Accuracy: 1% ± Vop Uncertainty
Vertical Gain	Range: 80 dB Accuracy: 2 dB
Power Filter	5 kHz Highpass
Averaging Filter	4x Waveform Avg.
Input Protection	± 400 V pk