SPECIFICATIONS
|
| OUTPUT |
Capacity |
500VA (APS-9050), 1000VA (APS-9100) |
| Frequency |
45.0 ~ 500Hz (50/60/120/400Hz Selectable) |
| Voltage |
0.0 ~ 300.0Vac, 0.1V/step (110V, 220V Selectable)
(0.0 ~ 150Vac for low range, 0.0 ~ 300Vac for high range) |
| MAXIMUM CURRENT |
4.2Arms for low range, 2.1Arms for high range (APS-9050)
8.4Arms for low range, 4.2Arms for high range (APS-9100) |
| LINE VOLTAGE REGULATION |
+ 0.1V |
| LOAD REGULATION |
+ 0.5% recovering time < 100µSÁF
+ 0.1V recovering time < 2 seconds |
| FREQUENCY RESPONSE |
+ 0.5% recovering time < 100µSÁF
+ 0.1V recovering time < 2 seconds |
| FREQUENCY STABILITY |
< 0.01% |
| WAVEFORM DISTORTION |
< 0.5% THD |
| PROTECTION |
OTP. OCP. Short |
| DIGITAL DISPLAY RANGES |
Frequency |
Measuring RangeÁG0.0 ~ 999.9Hz
ResolutionÁG0.1Hz
AccuracyÁG+ 0.1Hz |
| RMS V-Display |
Measuring RangeÁG0.0 ~ 380.0V
ResolutionÁG0.1V
AccuracyÁG+ (1% of rdg + 0.1V) |
| RMS A-Display |
Measuring RangeÁG0.000 ~ 2.000A or 1.80 ~ 35.00A
ResolutionÁG1mA or 0.01A
AccuracyÁG+ (1% of rdg + 5mA) or + (1% of rdg + 20mA) |
| Watt-Display |
Measuring RangeÁG0.0 ~ 360.0W or 320 ~ 3500W
ResolutionÁG0.1W or 1W
AccuracyÁG+ (1.5% of rdg + 0.5W) or + (1.5% of
rdg + 1W) |
| Power Factor Meter |
Measuring RangeÁG0.000 ~ 1.000
ResolutionÁG0.001
AccuracyÁG+ 2% of rdg + 0.002 |
| POWER SOURCE |
AC 115V/230V+15%, 47 ~ 63Hz |
| DIMENSIONS |
430(W) x 132(H) x 500(D) mmÁF3U (APS-9050)
430(W) x 220(H) x 500(D) mmÁF5U (APS-9100) |
MetricTest
Solutions
