| |
 |
| More Information |
|
|
|
|
Home >
Instek > GDS-2000
 Instek
GDS-2000 Series Oscilloscopes
The GDS-2000 series oscilloscopes offer rich selections of bandwidth and channel that cover major applications in laboratories,
production lines, or field services. A high sampling rate of 1 GSa/s and 25k point deep memory give a much more detailed view into
the target waveforms, while keeping a high sampling rate. A USB connection allows you to easily transfer and print data and screen images. The TFT color LCD display with wide viewing angle eliminates obscurity in any situation. Battery
operation option gives you mobility.
Features
- 200/100/60 MHz Bandwidth
- 2 or 4 Input Channels
- 1 GSa/s Real-Time and 25 GSa/s Equivalent-Time Sampling
- 25k Points Record Length Maximum
- Large 5.6-in TFT Color Display
- USB Host/Device: Support USB Printer and USB Flash Drive
- Battery Operation (optional)
- Color Printout
| |
GDS-2062/2064 |
GDS-2102/2104 |
GDS-2202/2204 |
|
Vertical |
Channels |
2 / 4 |
2 / 4 |
2 / 4 |
| Bandwidth |
60 MHz |
100 MHz |
200 MHz |
| Rise Time |
5.8 ns Approx. |
3.5 ns Approx. |
1.75 ns Approx. |
| Sensitivity |
2 mV/div~5V/div (1-2-5 increments) |
| Accuracy |
±(3% x [Readout] + 0.05 div x Volts/div |
| Input Coupling |
AC, DC, & Ground |
| Input Impedance |
1 M ±2%, -16 pF |
| Polarity |
Approx. 1M£[ |
| Maximum Input |
300 V (DC + AC peak), CATII |
| Waveform Signal Process |
+ , - , x , / , FFT |
| Offset Range |
2 mV/div ~ 20 mV/div : ±0.5V; 50 mV/div ~ 200 mV/div:±5V;
500 mV/div ~ 2 V/div : ±50 V; 5 V/div: ±300V |
| Bandwidth Limit |
20 MHz (-3 dB) |
| Trigger |
Sources |
CH1 , CH2 , Line , EXT(2CH Only) / (CH3,CH |
| Modes |
Auto-Level, AUTO, NORMAL, SINGLE, TV, Edge, Pulse Width Time-delay(2CH Only), Event-delay(2CH Only) |
| Coupling |
AC , DC , LF rej. , HF rej. , Noise rej. |
| Sensitivity |
DC ~ 25MHz : Approx. 0.5div or 5mV
25MHz ~ 60/100/200MHz : Approx. 1div or 10mV |
| Horizontal |
Range |
1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div |
| Modes |
MAIN, WINDOW, WINDOW ZOOM, ROLL, SCAN, X-Y |
| Accuracy |
±0.01% |
| Pre-trigger |
20 div maximum |
| Post-Trigger |
1000 div |
| Signal Acquisition |
Real-Time Sample Rate |
1 GS/s |
| Equivalent Time Sample Rate |
25 GS/s |
| Vertical Resolution |
8 Bits |
| Record Length |
25K Dots Maximum |
| Single Shot Bandwidth |
100 MHz |
| Acquisition Mode |
Sample, Peak Detect, Average, Accumulate |
| Peak Detection |
10 ns |
| Average |
2, 4, 8, 16, 32, 64, 128, 256 |
| Display |
TFT Display Type |
1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div |
| Display Resolution |
MAIN, WINDOW, WINDOW ZOOM, ROLL, SCAN, X-Y |
| Display Graticule |
±0.01% |
| Display Brightness |
20 div maximum |
| Interface |
GO/NO GO Output |
Open Collector |
| RS-232 |
DB 9-pin male DTE RS-232 interface |
| USB |
Host: Pen Drive, Printer
Device: Support remote control |
| GPIB (optional) |
Fully programmable with IEEE488.2 compliance |
| Power Source |
Line Voltage Range |
100 V ~ 240 VAC 48 Hz ~ 63 Hz, Auto select |
| Battery Power (opt.) |
Battery: 10.8 V Li Ion battery pack
Charge Time: 12 hours from AC Line
Operating Time: 3 hours, depending on operating condition |
| |
|
MetricTest
Solutions