SPECIFICATIONS
|
| Main Output |
|
| Waveforms |
Sine, Square, Triangle, +Ramp, Pulse, AM, FM, Sweep, Triggered
and Gated |
| Amplitude |
> 20Vpp open circuitÁF >10Vp-p into 50£[ load (at 1kHz) |
| Impedance |
50£[+10% |
| Attenuator |
1:1, 10:1, 100:1, 1000:1 and >10:1 continuous control |
| DC Offset |
< -10V to> +10VÁF < -5V to > +5V (50£[ load) |
| Variable Symmetry |
80:20:80 to 1MHz |
| Frequency Range |
0.1Hz to 13MHz in 8 Decade ranges |
| Sine Wave |
|
| Distortion |
<0.5% (-46dB) THD from 10Hz~50kHz
>30dB below fundamental from 50kHz~13MHz |
| Flatness |
<±3% from 10Hz~100kHz, <±10% from 100kHz~10MHz |
| Triangle Wave |
|
| Linearity Error |
<1% at 100Hz |
| Square Wave |
|
| Symmetry |
<2% 0.1Hz ~ 100kHz |
| Rise/ Fall Time |
<20nS |
| SYNC Output |
|
| Impedance |
50£[±10% |
| Level |
>1Vp-p open circuit |
| Modulation Characteristics |
| Types |
AM, FM, Sweep, Trigger, Gate or Burst (INT and EXT) |
| Wave Forms |
Sine, Square, Triangle, Ramp or Variable Symmetry pulse |
| Frequency Range |
0.01Hz ~10kHz in 3 Ranges |
| Output Level |
>1Vp-p into 10k£[ |
| Amplitude Modulation |
|
| Depth |
0~100% |
| Modulation Frequency |
0.01Hz~10kHz (internal), DC to 1 MHz (external) |
| Carries -3dB Bandwidth |
<100Hz to > 5MHz |
| External sensitivity |
<10Vp-p for 100% modulation |
| Frequency Modulation |
|
| Deviation |
0 to ±5%(internal) |
| Modulation Frequency |
0.01Hz~10kHz (internal), DC to 50kHz(external) |
| Sweep Characteristics |
|
| Sweep Width |
>100:1 |
| Sweep Rate |
0.01Hz ~ 10kHz, 90:10 ramp |
| Sweep Mode |
Linear sweep and symmetry control |
| Ramp Output |
0 to > -4Vp-p into 5k£[ |
| Gate Characteristics |
|
| Start/Stop Phase Range |
+90¢X to -80¢X |
| Frequency Range |
0.1Hz to 1 MHz (Max. to 10MHz) |
| Ext. Gate Frequency Range |
DC to 1MHz, TTL Compatible |
| VCF |
|
| Range |
1000:1 (0 to -2V+20%) |
| Input Linearity |
<0.5% to 1MHzÁF <5% to 10MHz (Dial set at 10) |
| Input Impedance |
2.8k£[ ±5% |
| GCV. |
|
| Output |
0 to +2V proportional to dial setting or sweep frequency |
| Frequency Counter |
|
| Display |
6 Digits(0.3" LED Display) |
| INT./EXT. |
Switch selector |
| Accuracy |
+Timebase accuracy ±1 count |
| Timebase |
Oscillation frequency 10MHz ±10ppm (23¢XC±5¢XC) |
| Resolution |
0.1Hz, 1Hz, 10Hz, 100Hz, 1kHz |
| Range |
0.1Hz to 13 MHZ (EXT. 5Hz~30MHz) |
| EXT. Sensitivity |
<20m Vrms |
| Power Source |
AC 100V/120V/220V/240V ±10%, 50/60Hz |
| Accessories |
Power cord x 1,
Instruction manual x 1,
GTL-101 x 2 |
| Dimensions & Weight |
310(W) x 99(H) x 380(D) mm, Approx 7.2kg |
Instek
GFG-813 Function Generator
MetricTest
Solutions