| |
TEC 1103 Active FET Probes
Features
- Powers up to Two Probes
- For Use with P6203, P6204, P6205, P6217, P6231, P6243, P6245, P6701B,
P6703B, P6711, P6713, P6723, P6246, P6247, P5205, P5210, ADA 400A
on Non-TEKPROBE Tektronix Interfaced Scopes*1
- Overload Protected
Applications
- High-speed Digital Systems Design
- ECL
- GaAs
- MOS: CMOS; FastCMOS; BiCMOS; TTL
- Component Design/Characterization
- Amplitude levels
- Aberrations
- Propagation delay and timing
- Bandwidths and rise times
- Educational Research
- Manufacturing Engineering and Test
Active FET Probes for TEKPROBE® BNC Interface
The P6204 and P6205 Probes are part of Tektronix' line of
Low Circuit Loading Signal Acquisition probes for CSA (Communications
Signal Analyzers), DSA (Digitizing Signal Analyzers), 11000 Series and
the TDS Family of Oscilloscopes.
The P6204 and P6205 are designed with FET devices for their
inputs, which allows very high input resistance values and low input capacitances.
The P6204 provides wide bandwidth, with low input capacitance
and the highest input resistance available. At the same time the P6204
is the only active FET probe available which provides remote control capabilities.
The P6205 provides low input capacitance and high input
resistance performance at a budget price.
Both Active FET probes provide a wide linear dynamic input
range for accessing most digital device families using today's logic voltage
levels.
Power for the P6204 and P6205 is supplied by the CSA, DSA,
TDS and 11000 Series mainframes through the TEKPROBE BNC Interface, eliminating
the need for extra cabling and/or external power supplies.*2
A variable DC Offset function, which is controlled through
the mainframe (CSA, DSA and 11000 Series) to bring signals (those within
the offset control range) into the dynamic range of the probe, is available
for the P6204.
Probe information such as type, serial number, attenuation
factor, offset scale factor, input resistance and termination resistance
required is communicated through the TEKPROBE Interface between the Active
Probe and the CSA, DSA and 11000 Series mainframes. This information is
used by these oscilloscope mainframes during the scope initialization
sequence and measurement analysis.
Remote Control of several 11000 Series Programmable Functions/Actions
is possible using the "Identify Button" on the P6204 probe head.
These functions include Autoset, recall the next in a series of stored
setups, invoke Automatic-Measurement, issue an SRQ (service action request)
or activate the trace identification function.
These Active Probes may also be use with 50 0hm or 1 megaohm
oscilloscope systems, with conventional BNC interfaces, via the Tektronix
1103 TEKPROBE® Power Supply. The 1103 has dual TEKPROBE
power supply inputs, dual BNC signal outputs and dual voltage offset on/off
switches and potentiometers.
Benefit Highlights
- Low Input C, High Input R - Minimizes circuit under test loading
- Probe Power Directly from CSA, DSA, TDS or 11000 Series TEKPROBE
BNC Interfaces - Means no additional cables or power supplies required*2
- Variable DC Offset (Except P6205) - Allows correction for DC levels
to bring the signal into the probe's dynamic measurement range
- Readout Coding for 10X Attenuation - Reduces confusion and errors
in measurement readings
- Gold-plated Replaceable Probe Tips - Improved electrical connections
and lower maintenance costs
- Miniature Size Accessories - Provides wide range of circuit attachments
- UL Listed - Third party certification for safe operation
Specifications
|
Probe Type
|
Nominal Cable Length in Meters
|
Attenuation
|
Bandwidth at -3 dB in MHz
|
Input C in pF
|
Input R in Ohm
|
Linear Dynamic Range in Volts
|
DC Offset Range in Volts
|
Max. Voltage in Volts (DC +pk AC)
|
Interface/Readout/
Identify*2
|
Recomm.
Instrument
|
|
P6204
|
1.5
|
10X
|
1000
|
1.9
|
10 M
|
±10
|
±15
|
±40
|
TPB/Y/Y
|
11000*3
|
|
P6205
|
1.5
|
10X
|
750
|
2
|
1 M
|
±10
|
NA
|
±40
|
TPB/Y/N
|
11000*3, TDS400*4, TDS 500,
TDS 600, TDS 700
|
Ordering Information
P6204
10X, 1 GHz Active FET Probe.
Includes: Retractable Hook Tip (013-0107-07);
6 in. Ground Lead with Alligator (196-3120-01); 6 in. Ground Lead with
Square-pin Receptacle (196-3198-01); Ground Contact, Spring (214-4125-00)
SMT KlipChipTM (206-0364-00); Insulating Ground Cover (166-0404-01);
IC Test Tip; Carrying Case; Instruction Manual (070-6949-03).
P6205
10X, 750 MHz Active FET Probe.
Includes: Same as P6204 except Instruction
Manual (070-8202-01).
1103
TEKPROBE Power Supply.
For P6203, P6204, P6205, P6245, P6231 and
P6700 Series. Powers two Probes.
International Power Plugs
Opt. A1 - Opt. A5 - Available. See General
Customer Information pages for additional description.
Additional Accessories (for 1103)
36 in. Precision 50 Ohm BNC Cable -
Order 012-0482-00.
50 Ohm Feedthrough Termination - Order
011-0049-01.
|
|
MetricTest
Solutions
