TEK 370A Curve Tracers
Features
- High Precision Measurements of Semiconductor Devices
- Up to 2000 Volts or 10 Amp Sourcing
- Up to 220 Watts
- 1 Nanoamp Measurement Resolution
- Down to 2 Millivolt Measurement Resolution
- Waveform Comparison
- Envelope Display
- Waveform Averaging
- Dot Cursor
- Kelvin Sense Measurements
- Fully Programmable
- 3.5 Inch MS-DOS Compatible Disk Storage to Save and Recall Setups
Applications
- Manual or Automated High Resolution DC
- Parametric Characterization of Semiconductors
- Incoming Inspection
- Manufacturing Test
- Process Monitoring and Quality Control
- Data Sheet Generation
- Component Matching
- Failure Analysis
- Engineering
370A Programmable Curve Tracer
The 370A, the world standard for high resolution curve tracers
is used in a wide variety of applications. The 370A performs DC parametric
characterization of transistors, thyristors, diodes, SCRs, MOSFETs, optoelectronic
components, solar cells, solid state displays and other semiconductor
devices.
In the R&D lab, it is used for characterization of new designs,
extraction of SPICE parameters, failure analysis and data sheet generation.
In manufacturing test, the 370A is used to verify device
quality and process monitoring.
The 370A is used for incoming inspection to verify device
performance, perform failure analysis and to match components.
Interactive Programmable Control
Interactive control of all measurements is accomplished
from the full featured front panel or over the GPIB. Operating parameters
can be adjusted and stored and recalled using several storage methods
including the 370A nonvolatile memory, the built-in DOS compatible floppy
disk or to an external controller.
Test and Measurement Software
Metrics software offers computer-controlled DC parameter
characterization of numerous semiconductor devices. Through Metrics ICS
control of the 370A, measurements can be performed without the need to
interact with the instruments front panel. Every aspect of instrument
control and data analysis is available through a set of interactive dialog
boxes that are configured in a graphics-oriented Microsoft Windows environment.
Test Fixturing
A test fixture is a standard accessory that provides safe
device enclosure to ensure operator protection during measurements. The
test fixture accommodates standard A1001 through A1005 adapters with Kelvin
sensing, 3-Pin adapters without Kelvin sensing and the A1023 and A1024
surface mount adapters.
Specifications
Modes- AC, ±DC, ±Leakage,
±Rectified Sine.
|
Range
|
Max PeakCurrent (±)
|
Peak Current Pulsed (±)*1
|
|
16 V
|
10 A
|
20 A
|
|
80 V
|
2 A
|
4 A
|
|
400 V
|
.4 A
|
.8 A
|
|
2000 V
|
.05 A
|
.1 A
|
Step Generator
Modes - Stair step: DC, 80 µsec
pulse, 300 µsec pulse.
Step Range - Current: 50 nA to 200 mA
in 1-2-5 sequence. Voltage: 50 mV to 2 V in 1-2-5 sequence.
Offset - Up to ±10X step
amplitude.
No. of steps - 0 to 10.
Measurement Characteristics
Collector Current -
Measurement range: 100 nA/div (1 nA resolution) to 2 A/div.
Accuracy: 1.5% of cursor readout +0.05 div of setting (with dot cursor).
Emitter Current -
Measurement range: 1 nA/div (10 pA resolution) to 2 mA/div.
Accuracy: 1.5% of cursor readout + 0.05 div of setting + 1 nA.
Safety - UL1244, CSA231, HD401 S1.
Instrument Cart
- Ergonomic design
- Simple height, angle and shelf adjustments
- Durable steel and aluminum construction
- Large diameter smooth rolling casters
- Nylon safety straps included
Specs
Ordering Information
370A
Curve Tracer.
Includes: Blank Adapter A1001; In-line
Transistor A1002, Axial Diode Lead Adapter A1005; 4 and 6 Lead Transistor/FET
Adapter A1007; Floppy Diskette (119-3446-00); Protective Cover (337-3344-00);
Spare Fuses 125 V/4 A (159-0259-00); Slow Blow 250 V/2 A Fuse(159-0160-00);
Power Cord (161-0066-00); Operator's Manual (070-7779-00).
Opt. 1R - Rack Mounting.
Measurement Service Options
Opt. C3 - Three years of Calibration Services.
Opt. D1 - Cal Data Report.
Opt. D3 - Test Data (requires Opt. C3).
Opt. R3 - Repair warranty extended to cover
three years.
Additional Accessories
Also see Accessories.
Service Manual - Order 070-7780-00.
Calibration Fixture - Order 067-0187-00.
Rackmount Kit - Order 016-0930-00.
Socket Adapters - See adapters on Semiconductor
Testers, Device Adapters.
Software
METRICS ICS Software - Requires 063-1650-00
drivers. Order 063-1649-00.
METRICS Software Drivers - Tektronix 37x
Curve Tracer Drivers. Order 063-1650-00.
Cart - Order K475.
|
MetricTest
Solutions
