TEK A6302 Probes for Current Measurement Systems
Features
The A6312, A6302 and A6303 offer a wide range of current measurement
capability for the lab and bench environment. The A6312 covers frequencies
from DC to 100 MHz while the A6302 covers DC to 50 MHz. Both
clip onto conductors up to 3.81 mm (0.15 in.) and measure continuous currents
up to 20 A and peak currents up to 50 A as long as they do not exceed
the amp*second product of 100 A*µs. The larger A6303 measures higher
amplitude, lower frequency currents.
It clips onto conductors up to 21.1 mm (0.83 in.) in diameter. Its frequency
range is DC to 15 MHz. It will measure continuous currents up to
100 A and peak currents up to 500 A, as long as the Amp*second product
of 10,000 A*µs is not exceeded.
The A6312, A6302 and A6303 are also compatible with the 11A16 2-CH Current
Probe Amplifier for the 11000 and DSA Series oscilloscopes. With the 11A16,
the A6312 and A6302 are rated for 10.5 A, and the A6303 for 52.5 A.
- 20 Amps Continuous/50 Amps Peak
- DC to 50 MHz
- 2 Meter Cable
- Up to 0.15 in. Conductor Diameter
Specifications
|
Instrument application
|
Oscilloscope
|
|
Measurement Parameter
|
AC/DC Current
|
|
Probe type
|
Active
|
|
Minimum Frequency
|
0 Hz
|
|
Maximum Frequency
|
50 MHz
|
|
Maximum Input
|
20 A
|
|
Cable Length
|
200 cm
|
Specs
Ordering Information
Includes: 6 in. (152 mm) Ground Lead (196-3120-01),
A6302 and A6302/XL Instruction Manual (070-9605-04).
|
MetricTest
Solutions
