TEK A6304XL Probes for Current Measurement Systems

Features

The three XL current probes add both convenience and expanded current measurement capability. The XL probes are designed to operate with the AM 503B and AM 5030 Current Probe Amplifiers. They are incompatible with the older AM 503 and AM 503A amplifiers. The XL (for extra long) probes have eight-meter cables, which allow you to reach test points on large devices such as heavy duty motors or automobiles. In addition, connecting to test points on transportation platforms such as trains, ships, or aircraft is much easier with the XL probes.

The A6302XL and A6303XL are modified versions of the A6302 and A6303 probes. The A6302XL can measure 20 A continuous (50 A peak) signals from DC to 17 MHz. The A6303XL can measure 100 A continuous (500 A peak) signals from DC to 10 MHz.

The A6304XL is rated for 500 A continuous (700 A peak) and is the same size as the A6303XL. The A6304XL has a bandwidth of DC to 2 MHz and is especially well suited for measurements on high-performance inverters, motor drives, and other high current switch-mode control devices. The eight meter cable makes it very easy to access test points on devices physically separated from your measurement instrument.

Specifications

• 8 Meter Cable
• 500 Amps Continuous/700 Amps Peak
• DC to 2 MHz

Specs

Ordering Information

TEK A6304XL Probes for Current Measurement Systems

Includes: Carrying Case (202-0318-00); A6304XL Instructions (070-8939-01).

Note: XL Probes work only with AM 503B or AM 5030 Current Probe Amplifiers.

Includes: Carrying Case (202-0318-00); 12 in. wide, 4 ft. long High Voltage Bushing (015-0194-00); Instruction Manual (070-6478-02).

Measurement Service Option A6303/A6302XL/A6303XL/A6304XL