TEK A6312 Probes for Current Measurement Systems
Features
The A6312, A6302 and A6303 offer a wide range of current measurement
capability for the lab and bench environment. The A6312 covers frequencies
from DC to 100 MHz while the A6302 covers DC to 50 MHz. Both
clip onto conductors up to 3.81 mm (0.15 in.) and measure continuous currents
up to 20 A and peak currents up to 50 A as long as they do not exceed
the amp*second product of 100 A*µs. The larger A6303 measures higher
amplitude, lower frequency currents.
It clips onto conductors up to 21.1 mm (0.83 in.) in diameter. Its frequency
range is DC to 15 MHz. It will measure continuous currents up to
100 A and peak currents up to 500 A, as long as the Amp*second product
of 10,000 A*µs is not exceeded.
The A6312, A6302 and A6303 are also compatible with the 11A16 2-CH Current
Probe Amplifier for the 11000 and DSA Series oscilloscopes. With the 11A16,
the A6312 and A6302 are rated for 10.5 A, and the A6303 for 52.5 A.
Specifications
- 20 Amps Continuous/50 Amps Peak
- DC to 100 MHz
- 2 Meter Cable
- Up to 0.15 in. Conductor Diameter
Specs
Ordering Information
2 MHz, 8 m, 500 A Current Probe.
Includes: Carrying Case (202-0318-00); A6304XL Instructions
(070-8939-01).
Note: XL Probes work only with AM 503B or AM 5030 Current
Probe Amplifiers.
CT-4
Current Probe, High Current.
Includes: Carrying Case (202-0318-00); 12 in. wide,
4 ft. long High Voltage Bushing (015-0194-00); Instruction Manual
(070-6478-02).
Measurement Service Option A6303/A6302XL/A6303XL/A6304XL
|
MetricTest
Solutions
