| |
TEK CPS250 Power Supply
Features
The CPS250 has a single fixed 5 V and 2 A supply and two variable
0 to 20 V, 0.5 A supplies.
Its compact design with tilt-bail handle takes up less bench space than
most other power supplies, which makes it ideal for those no fuss fundamental
supply needs.
Applications
- Training
- Manufacturing Production Test
- Field Repair
- Bench Calibration and Repair
- Product Design
- Laboratory and Research
- Education/Training
Specifications
| Output Voltage: |
| Two Variable: |
0 to 20 VDC |
| One Fixed: |
5.0 V |
| Output
Current: |
| Two Variable: |
0 to 0.5 A (CC)*1
|
| One Fixed
(foldback limited): |
2.0
A max |
| Line
Regulation: |
| Two Variable: |
0.01% + 3 mV (CV); 0.2%
+ 3 mA (CC) |
| One Fixed: |
<10 mV
(CV) |
| Load
Regulation: |
| Two Variable: |
0.01% + 3 mV (CV); 0.2%
+ 6 mA (CC) |
| One Fixed: |
0.1%
+ 5 mV (CV) |
| Ripple/Noise: |
| Two Variable: |
2 mV rms, 5 Hz
to 1 MHz (CV); 3 mA rms, 5 Hz to 1 MHz (CC) |
| One Fixed: |
2 mV
rms |
| Output in Independent Mode: |
Two variable 0 to 20 V
(CV); 0.5 A (CC) |
| Output in
Parallel Mode: |
One
0 to 20 V, 1.0 A max |
| Tracking Error: |
±0.2% ±20 mV |
| Series Mode:
|
One
0-40 V, 0.5 A max or one ±20 V, 0.5 A |
| Tracking Error: |
±0.2% ±20 mV |
| Displays:
|
Two
analog meters (switchable) |
| Voltage Indicator: |
0 to 25 VDC ±2.5%
of full scale |
| Current
Indicator: |
0
to 800 mA ±2.5% of full scale |
| Overload Indicator: |
Yes |
| Insulation: |
| Chassis to Terminal: |
>50 megaohm at 500 VDC |
| Chassis
to Power Cord: |
>50
megaohm at 500 VDC |
| Safety Certification: |
UL3111-1, CSA1010.1, EN61010-1,
T-MARK |
|
|
MetricTest
Solutions
