TEK P6158 20X Low Capacitance Probe
Features
The P6158 is a 3 GHz, 20X, low-capacitance probe. The P6158 is ideal
for high-speed applications because of its ability to extend high-frequency
response to 3 GHz. The BNC connector incorporates encoding to correct
scale factors for 20X attenuation in oscilloscopes with TEKPROBE power
supply interface. To facilitate SMD probing, the P6158 comes standard
with SureFoot adapters. Additionally, the probe comes standard with an
array of short ground leads that insert minimal inductance into the signal
path of the measured waveform. The compact probe head/tip assembly is
compatible with the full line of 3.5 mm probe accessories. Although designed
for the TDS 500/600/700 series oscilloscopes, the P6158 probe may be used
with 11000 Series plug-ins, and the 11800 Series SD2X Sampling/TDR plug-ins.
- 3 GHz Bandwidth
- 1.5 pF Input Capacitance
- 1 kilohm Input Resistance
- 22 Vrms Max. Input Voltage
- Activates 20X Readout in TEKPROBE® Interface Instruments
- Compact Probe Tip Compatible with a Wide Range of Tektronix Accessories
and Adapters
Applications
- High-speed Device Characterization
- Propagation Delays for ECL, CMOS, and Other Logic Circuitry and Devices
- Circuit Board Impedance Testing (TDR)
- High-speed Sampling Systems
Specifications
Bandwidth (Probe Only) - DC to 3 GHz, -3 dB.
Rise Time - >100 ps.
Attenuation - ÷20 (-26 dB).
Attenuation Accuracy - ±3%.
Input C - 1.5 pF.
Input R - 1 kilohm.
Output Termination - Terminate into 50 Ohm.
Signal Delay - 5 ns.
Physical Characteristics
Probe Tip/Head Style - 3.5 mm/Compact.
Output Cable Length - 1.2 m.
Environmental Characteristics
Temperature -
Operating: -15° C to +55° C (+5° F to +131° F).
Humidity -
High Operating: 55° C @ 95 to 97% RH.
Low Operating: 30° C @ 95 to 97% RH.
Recommended Instruments
TDS 500/600/700 Series.
11000 Series.
11800 SD2X Sampling/TDR plug-ins.
|
MetricTest
Solutions
