TEK P6207 Active FET Probe
Features
The P6207 Active (FET) Probe is a Low Circuit Loading Signal Acquisition
probe for TDS820 Oscilloscopes.
The P6207 provides the widest bandwidth and lowest input capacitance
at 100 kilohm available for a handheld active voltage probe.
The P6207 provides a wide linear dynamic input range for accessing most
digital device families using today's logic voltage levels.
The P6207's lower input capacitance reduces the AC current flow and the
sensitivity to ground loops, thereby easing ground lead length requirements.
Benefit Highlights
- Low Input C, High Input R - Minimizes circuit under test loading.
- Probe Power Directly from TDS800 Series TEKPROBE SMA Interfaces -
Means no additional cables or power supplies required.
- Variable DC Offset - Allows correction for DC levels to bring the
signal into the probe's dynamic measurement range.
- Readout Coding for 10X Attenuation - Reduces confusion and errors
in measurement readings.
- Gold-Plated Probe Tips - Improved electrical connections.
- UL Listed - Third party certification for safe operation.
Probe Tip Adapter
The Probe Tip Adapter is a high-performance 50 Ohm "T"
type pickoff for use with high impedance Tektronix P6207 or P6217 Active
FET probes, the Tektronix SD-14 Sampling Head and other probes compatible
with the 4 mm probe tip system. The in-line portion of the "T"
is fitted with SMA-compatible 2.92 mm connector, one end male and one
end female. The signal pickoff point is a receptacle for the Probe Tip.
An SMA male 50 Ohm termination is included.
When used with the P6207 or P6217, the Probe Tip Adapter allows signal
pickoff from a 50 Ohm system with a minimum of disturbance of the
system characteristics. This provides a convenient means of obtaining
a signal for the P6207 or P6217 from a closed coaxial 50 Ohm system.
- Ultra-low Input Capacitance
- 0.5 pF Provides Lower Circuit Loading and the Use of Longer Ground
Leads
- 100 kilohm Input Resistance
- Maintains Circuit Biasing Levels
- Active Performance with Passive Simplicity
- Variable DC Offset ±5 V
- Integral Probe Power TEKPROBE® SMA
- Small Geometry Accessibility
Specifications
Nominal Cable Length in meters - 1.6.
Attenuation - 10X.
Bandwidth at-3dB in MHz - 4000
Input C in pF - 0.5 Typical.
Input R in Ohm - 100 k.
Linear Dynamic Range in Volts - ±4.0
DC Offset Range in Volts - ±5.0.
Maximum Voltage in Volts (DC + pk AC)
- ±40.
Interface/Readout/Identify*1 - TPS/Y/N.
Recommended Instruments - TDS820.
|
MetricTest
Solutions
