TEK P6209 4GHz Active Probe

Features

The P6249 has similar performance to the P7240 above. Primarily used for the TDS694C and TDS794D high performance scopes, the P6249 may also be used with conventional BNC interfaces via the Tektronix 1103 TEKPROBE Power Supply. A full complement of versatile probe tip accessories helps users connect to the wide range of devices faced by digital designers.

The P6209 provides a high-bandwidth, low circuit loading probing solution for the TDS8000 and TDS 800 Series sampling oscilloscopes with TEKPROBE SMA input connection. Based on the P6249 probe design, the P6209 has similar performance and a similar small probe head for access to today's fine-pitch SMDs and connection points.

• 4 GHz Bandwidth
• < 120 ps Rise Time
• Small Form Factor Probe Head
• Full Set of SMD Connection Accessories
• Direct Access to SMDs as Small as .010" Pitch

Specifications

Bandwidth - DC to 4.0 GHz at -3 dB (typical, probe only).

Rise Time - < 120 ps (guaranteed, 20°C to 30°C).

Dynamic Range - ±1.75 V.

Attenuation - 5x.

Input Resistance - 20 kilohm (typical).

DC Offset Range - ± 5 Vdc.

Input Capacitance - < 1 pF (typical).

Max Voltage (Nondestruct) - ± 30 V (DC plus peak AC).

Cable Length -
P6209: 1.37 m (includes output SMA cable).
P7240, P6249: 1.4 m.

Output Load Requirement - 50 Ohm.

Linearity - ± 0.1% at DC.

Output Offset - Probe Only: ±7.5 mV or less (20°C to 30°C).

DC Offset Drift -
150  µV/°C or less (probe only).
System on-screen display w/TEKPROBE or TekConnect interface: 0.75 mV/°C or less.