Tektronix TDS5052 at Metrictest.com

	TDS5052	TDS5054	TDS5104
Input Channels	2	4	4
Analog Bandwidth (-3 dB) 5 mV/div - 1 V/div	500 MHz	500 MHz	1 GHz
Calculated Rise Time 5 mV/div (typical)	800 ps	800 ps	400 ps
Hardware Bandwidth Limits	150 MHz or 20 MHz
Input Coupling	AC, DC, GND
Input Impedance	1 MOhm ±1% or 50 Ohm ±1%
Input Sensitivity, 1 MOhm	1 mV/div to 10 V/div
Input Sensitivity, 50 Ohm	1 mV/div to 1 V/div
Vertical Resolution	8-bits (>11-bits w/ averaging)
Max Input Voltage, 1 MOhm	±150 V CAT I derate at 20 dB/decade to 9 V_RMS above 200 kHz
Max Input Voltage, 50 Ohm	5 V_RMS with peaks <±30 V
DC Gain Accuracy	1.5% with offset set to 0 V
Offset Range, 1 MOhm	1 mV/div - 99.5 mV/div ±1 V 100 mV/div - 1 V/div ±10 V 1.01 V/div - 10 V/div ±100 V
Offset Range, 50 Ohm	1 mV/div - 99.5 mV/div ±1 V 100 mV/div -1 V/div ±10 V		1 mV - 50 mV/div ±0.5 V 50.5 mV - 99.5 mV ±0.25 V 100 mV - 500 mV ±5 V 505 mV - 1 V/div ±2.5 V
Channel-to-channel Isolation Any Two Channels at Equal Vertical Scale	>100:1 at <100 MHz and >30:1 at >100 MHz up to the rated bandwidth

	TDS5052	TDS5054	TDS5104
Timebase Range	200 ps/div to 40 s/div
Timebase Delay Time Range	16 ns to 250 s
Channel-to-channel Deskew Range	±25 ns
Delta Time Measurement Accuracy	±(0.30 sample interval) + (15 ppm * reading)
Trigger Jitter (RMS)	8 ps_RMS (typical)
Long Term Sample Rate and Delay Time Accuracy	±15 ppm over >1 ms interval

	TDS5052	TDS5054	TDS5104
Real-time Sample Rates
1 Channel (max)	5 GS/s
2 Channels (max)	2.5 GS/s
3-4 Channels (max)	--	1.25 GS/s	1.25 GS/s
Equivalent Time Sample Rate (max)	250 GS/s
Maximum Record Length per Channel with Standard Memory	400 k (1 ch) 200 k (2 ch)	400 k (1 ch), 200 k (2 ch), 100 k (4 ch)	400 k (1 ch), 200 k (2 ch), 100 k (4 ch)
With Opt. 1M	2 M (1 ch), 1 M (2 ch)	2 M (1 ch), 1 M (2 ch), 500 k (4 ch)	2 M (1 ch), 1 M (2 ch), 500 k (4 ch)
With Opt. 2M	8 M (1 ch), 4 M (2 ch)	8 M (1 ch), 4 M (2 ch), 2 M (4 ch)	8 M (1 ch), 4 M (2 ch), 2 M (4 ch)

	TDS5052	TDS5054	TDS5104
Time Resolution (single shot)	200 ps (5 GS/s)
Max Duration with Standard Memory	80 µs
Max Duration with Opt. 1M	400 µs
Max Duration with Opt. 2M	1.6 ms

	TDS5052	TDS5054	TDS5104
FastAcq Acquisition	FastAcq optimizes the instrument for analysis of dynamic signals and capture of infrequent events
Maximum FastAcq Waveform Capture Rate	100,000 wfms/s
Sample	Acquire sampled values
Peak Detect	Captures narrow glitches at all real-time sampling rates
Minimum Peak Detect Pulse Width	<1 ns
Averaging	From 2 to 10,000 waveforms included in average
Envelope	From 2 to 2 x 10⁹ waveforms included in min-max envelope
Hi-Res	Real-time boxcar averaging reduces random noise and increases resolution

	TDS5052	TDS5054	TDS5104
Sensitivity
Internal DC Coupled	0.35 div DC to 50 MHz increasing to 1 div at 500 MHz		0.35 div DC to 50 MHz increasing to 1 div at 1 GHz
External (auxiliary input)	400 mV from DC to 50 MHz increasing to 750 mV at 100 MHz
Main Trigger Modes	Auto, Normal and Single
Trigger Sequences	Main, Delayed by time, Delayed by events. All sequences can include separate horizontal delay after the trigger event to position the acquisition window in time
Trigger Level Range
Internal	±10 divisions from center of screen
External (auxiliary in)	±8 V
Line	Fixed at 0 V
Trigger Coupling	DC, AC (attenuate <60 Hz), HF reject (attenuate >30 kHz), LF reject (attenuates <80 kHz, noise reject (reduce sensitivity)
Trigger Holdoff Range	250 ns minimum to 12 s maximum

Edge - Positive or negative slope on any channel or front panel auxiliary input. Coupling includes DC, AC, noise reject, HF reject and LF reject.

Video - Trigger on NTSC, PAL, SECAM, analog HDTV and non-standard video formats.

Glitch - Trigger on or reject glitches of positive, negative or either polarity. Minimum glitch width is 1.0 ns with 200 ps resolution.

Width - Trigger on width of positive or negative pulse either within or out of selectable time limits (1 ns to 1 s).

Runt - Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again. Event can be time or logic qualified (logic on 4 channel models only).

Window - Trigger on an event that enters or exits a window defined by two user-adjustable thresholds. Event can be time or logic qualified (logic on 4 channel models only).

Timeout - Trigger on an event which remains high, low or either, for a specified time period, selectable from 1 ns to 1 s with 200 ps resolution.

Transition - Trigger on pulse edge rates that are faster or slower than specified. Slope may be positive, negative or either.

Setup/Hold - Trigger on violations of both setup time and hold time between clock and data present on any two input channels.

Pattern - Trigger when pattern goes false or stays true for specified period of time. Pattern (AND, OR, NAND, NOR) specified for four input channels defined as High, Low or Don't Care.

State - Any logical pattern of channels (1, 2, 3) clocked by edge on channel 4 (channel 2 on TDS5052). Trigger on rising or falling clock edge.

Amplitude - Amplitude, High, Low, Maximum, Minimum, Peak to Peak, Mean, Cycle Mean, RMS, Cycle RMS, Positive Overshoot, Negative Overshoot.

Time - Rise Time, Fall Time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Period, Frequency, Delay.

Histogram-related (optional) - Waveform count, Hits in box, Peak hits, Median, Maximum, Minimum, Peak to Peak, Mean (µs), Standard Deviation (sigma), µ+1 (sigma), µ+2 (sigma), µ+3 (sigma).

Window Functions - Rectangular, Hamming, Hanning, Kaiser-Bessel, Blackman-Harris, Gaussian, Flattop2, Tek Exponential.

Algebraic Expressions - Define extensive algebraic expressions including waveforms, scalars and results of parametric measurements e.g. (Integral (Ch1-Mean(Ch1))*1.414).

Frequency Domain Functions - Spectral magnitude and phase, real and imaginary spectra.

Waveform Styles - Vectors, Dots, Intensified Samples, Variable Persistence, Infinite Persistence.

TekVISA - Application Programmers Interface (API) for Windows developers. Documentation includes descriptions and samples of programming test and measurement applications on the unit in Visual BASIC, C and C++.

Plug-and-play Drivers - Provides support to run National Instrument's LabVIEW and LabWindows on an external PC connected to a TDS5000 Series oscilloscope.

TekVISA Control (TVC) - ActiveX controls to make access to TekVISA easy for integration into Microsoft Windows applications.

Excel Toolbar - Provides direct access to waveforms and measurements on the oscilloscope from a toolbar in Excel.

VXI-11 server - An Application Programmers Interface (API) for LAN connectivity from non-Windows environments.

For information regarding TDS5000 Series compatibility with National Instruments hardware and software products, contact your local Tektronix account manager.
For information about using a TDS5000 Series oscilloscope as a GPIB controller, contact your local Tektronix account manager.

Auxiliary Input - Front panel BNC connector. Trigger level range is adjustable from +8 V to -8 V. The maximum input voltage is ±20 V.

Probe Compensator Output - Front panel pins. Amplitude 1 V ± 1% into a >10 kOhm load, frequency 1 kHz ±5%.

Analog Signal Output Amplitude - Rear-panel BNC connector, provides a buffered version of the signal that is attached to the Channel 3 input. 20 mV/div ±20% into a 1 MOhm load, 10 mV/div ±20% into a 50 Ohm load (4 channel models only).

Analog Signal Output Bandwidth, Typical - 100 MHz into a 50 Ohm load (4 channel models only).

Auxiliary Output Levels - Rear-panel BNC connector, provides a TTL-compatible, negative polarity pulse when the oscilloscope triggers.

Audio Ports - Miniature phone jacks for stereo microphone input and stereo line output.

USB Port - Allows connection or disconnection of USB keyboard and/or mouse while oscilloscope power is on.

SVGA Video Port - DB-15 female connector; connect a second monitor to use dual-monitor display mode. Supports basic requirements of PC99 specifications.

Scope VGA Video Port - DB-15 female connector, 31.6 kHz sync, EIA RS-343A compliant, connect to show the oscilloscope display, including live waveforms on an external monitor or projector.

Benchtop Configuration
Dimensions	mm	in.
Height	285	11.2
Width	447	17.6
Depth	288	11.35
Weight	kg	lbs.
Net	10.55	23.25
Shipping	25	55
Rackmount Configuration
Dimensions	mm	in.
Height	267	10.5
Width	483	19
Depth	288	11.35
Weight	kg	lbs.
Net	11.8	26
Kit	5	11
Mechanical
Cooling - Required Clearance for Benchtop Configuration
Dimensions	mm	in.
Top	0	0
Bottom	0	0
Left Side	76	3
Right Side	0	0
Front	0	0
Rear	0	0

Operating - 20% to 80% relative humidity with a maximum wet bulb temperature of +29°C at or below +50°C, noncondensing. Upper limit derated to 25% relative humidity at +50°C.

Nonoperating - With no diskette in floppy disk drive. 5% to 90% relative humidity with a maximum wet bulb temperature of +29°C at or below +60°C, noncondensing. Upper limit derated to 20% relative humidity at +60°C.

Operating - 0.1 GRMS from 5 to 500 Hz, 10 minutes each axis, 3-axes, 30 minutes total.

Nonoperating - 2.0 GRMS from 5 to 500 Hz, 10 minutes each axis, 3-axes, 30 minutes total.

Tektronix TDS5000 Series Digital Phosphor Oscilloscopes