| |
 |
|
Acterna(TTC) FIREBERD 6000 Communications Analyzer
The FIREBERD 6000 is known for its excellence in physical layer testing,
but Acterna is also committed to providing superior test solutions for
new technologies, such as frame relay and asynchronous transfer mode (ATM).
In fact, using modular plug-in interfaces and mainframe options, you can
use a FIREBERD 6000 to test circuits and equipment operating at rates
from 50 bps to 52 Mbps. You can rest assured that the FIREBERD's easy-to-use,
menu-driven test methodology will always be there to meet your test requirements
-- and because you don't have to master a new instrument when your testing
needs change, you level the learning curve and decrease your training
costs. You set high standards for the performance of your digital network.
That's why you should select an instrument whose quality and reliability
have been proven in the field -- FIREBERD Communications Analyzers from
Acterna.
Highlights
- Test ATM, frame relay, ISDN, low-speed data, T1, 2M, T3, and 34M with
the same instrument, and recall up to ten of your most frequently used
test setups with the push of a button
- Detect hard-to-find bit error rate (BER) problems quickly, and interpret
test results easily using customized printouts that show only the results
that you specify
- Reduce response time and extend the reach of your field technician
with remote testing. DTM32 and Remote Test Manager (RTM) software options
enable you to perform remote testing from your PC or UNIX workstation
- Use your FIREBERD to test analog circuits. The TIMS-45 Lid enables
you to perform VF and wideband Transmission Impairment Measurement Set
(TIMS) tests on analog and digital transmission lines
- Automate routine testing on your FIREBERD 6000 with Dynamic Script
Generator Option and free LabVIEW drivers
- The FIREBERD's industry-leading three-year warranty and field-tested
quality and reliability allow you to rest easy knowing your FIREBERD
is always ready when you need it.
Features
The FIREBERD 6000 Communications Analyzer brings advanced features to
today's complex networks. Whether your test requirements include ATM or
ISDN testing, physical layer and data link layer analysis of frame relay,
or generation and measurement of the jitter tolerance of your T1 or 2M
circuits, the capability of the FIREBERD 6000 is as unlimited as the technologies
within your network.
- Fast Packet Testing -- DS1/DS3 ATM, 2M/34M ATM, and frame relay
- ISDN Testing -- European and North American basic rate ISDN (BRI)
- T-Carrier Testing -- DDS, T1/FT1, and DS3
- E-Carrier Testing -- 2M and Nx64, 64 kbps, 8Mbps and 34M
- DTE/DCE Datacom Testing -- HSSI; RS-232/V.24, IEA-530, V.35/306, X.21,
RS-449/422/423, and MIL-188C
- Automated Testing -- Dynamic Script Generator
|
MetricTest
Solutions
