| |
TTC 6000A
Fireberd Communications
Analyzer
The FIREBERD 6000A is known for its excellence in physical layer testing,
but TTC is also committed to providing superior test solutions for new
technologies, such as frame relay and asynchronous transfer mode (ATM).
In fact, using modular plug-in interfaces and mainframe options, you can
use a FIREBERD 6000A to test circuits and equipment operating at rates
from 50 bps to 52 Mbps. You can rest assured that the FIREBERD's easy-to-use,
menu-driven test methodology will always be there to meet your test requirements
-- and because you don't have to master a new instrument when your testing
needs change, you level the learning curve and decrease your training
costs. You set high standards for the performance of your digital network.
That's why you should select an instrument whose quality and reliability
have been proven in the field -- FIREBERD Communications Analyzers from
TTC.
Features
The FIREBERD 6000A
Communications Analyzer brings advanced features to today's complex networks.
Whether your test requirements include ATM or ISDN testing, physical layer
and data link layer analysis of frame relay, or generation and measurement
of the jitter tolerance of your T1 or 2M circuits, the capability of the
FIREBERD 6000A is as unlimited as the technologies within your network.
- Fast Packet Testing -- DS1/DS3 ATM, 2M/34M ATM, and frame relay
- ISDN Testing -- European and North American basic rate ISDN (BRI)
- T-Carrier Testing -- DDS, T1/FT1, and DS3
- E-Carrier Testing -- 2M and Nx64, 64 kbps, 8Mbps and 34M
- DTE/DCE Datacom Testing -- HSSI; RS-232/V.24, IEA-530, V.35/306, X.21,
RS-449/422/423, and MIL-188C
- Automated Testing -- Dynamic Script Generator
Specifications
| Datacom Interfaces |
V.35 |
| Maximum Bit Rate |
52 Mbits |
| Interface Status LEDs |
NO |
| Test Modes |
DCE,DTE |
| SYNC TEST |
NO |
| ASYNC TEST |
NO |
| Bert Testing |
YES |
| Block Error Rate Test |
NO |
| Single Error Injection |
NO |
| Error Rate Injection |
NO |
| Internal Clock Generation |
NO |
| Clock Offset |
NO |
| SLIPS Measurement |
NO |
| Clock Frequency Measurement |
NO |
| G.821 Results |
NO |
| G.826 Results |
NO |
| M.2100 Results |
NO |
| Propagation Delay Measurement |
NO |
| Histograms |
NO |
| Poll Testing |
NO |
| X.50 Testing |
NO |
| Remote Control Interface |
IEEE-488.3 Optional |
Specs
(PDF)
Additional Information
The FIREBERD 6000A has a variety of hardware and software accessories to
enhance its performance, including
- TIMS-45 Analog Lid Option
- Software
- ISU 6000-4 and ISU 6000-8 Interface Switching Units
- Printers
- IEEE-488.2 Remote Control Option
|
|
MetricTest
Solutions
