| Image |
 |
Models |
|
Product Highlights |
| Agilent
DSO80000B Series Infiniium Oscilloscopes
- 2 to 6 GHz Bandwidth, Up to 40 GSa/s, 4 Channels |
|
|
DSO80204B
DSO80304B
DSO80404B
DSO80604B
|
|
| • |
Industry's only bandwidth upgradeable series |
| • |
Up to 2 Mpts MegaZoom deep memory upgrades |
| • |
Industry's lowest noise floor: 241 uV @ 5 mV/div |
| • |
Trigger jitter less than 500 fs rms |
| • |
Industry's largest set of software applications |
| • |
Option 005 (noise reduction) recommended |
|
| Agilent
54855A Infiniium Oscilloscope
- 6 GHz BW, 20 GSa/s, 4 Channels |
|
|
54855A
|
|
| • |
Up to 1 Mpts MegaZoom deep memory at all sample
rates and 32 Mpts MegaZoom deep memory at
2 GSa/s and slower sample rates |
| • |
Trigger jitter as low as 1.0 ps rms |
| • |
Option 008 (enhanced bandwidth) recommended |
|
| Agilent
N5416A
- USB 2.0 Compliance Test Software |
|
|
N5416A |
|
| • |
Recognized by the USB-IF for official compliance testing |
| • |
New setup wizard for fast setup, configuration and test |
| • |
USB-IF MATLAB® script execution inside the Infiniium oscilloscope |
| • |
Compatible with Infiniium 8000, 80000 and 54850 Series |
| • |
4 or 4+16 Channel scopes required |
|
| Agilent
E2649A
- USB 2.0 High Speed Fixture Set |
|
|
E2649A |
|
| Set contains: |
| • |
Device Signal Quality test fixture |
| • |
Host Signal Quality test fixture |
| • |
Receiver Sensitivity test fixture |
| • |
Device TDR test fixture |
| • |
Host TDR test fixture |
| • |
Host Disconnect test fixture |
| • |
Power supply |
|
| Agilent
1131A
- InfiniiMax probe amplifier |
|
|
1131A |
|
| • |
3.5 GHz Bandwidth |
| • |
Higher bandwidth Infiniimax probes can also be used |
| • |
2 required for hub testing |
| • |
Additional kit of 10 damped adapters required
(See Agilent for model # 01131-68703) |
|
| Agilent
E2678A
- InfiniiMax differential socketed probe head |
|
|
E2678A |
|
| • |
Use with InfiniiMax probe amplifiers |
| • |
2 required for hub testing |
|
| Agilent
Digital Multimeters
- 6˝ Digit High Performance |
|
 |
34410A
34411A |
|
| • |
34410A: 10,000 readings/sec @ 5 1/2 digits |
| • |
34411A: 50,000 readings/sec @ 4 1/2 digits |
| • |
LAN, USB, & GPIB standard |
| • |
Capacitance & temperature measurements |
|
| Agilent
82357A
- USB to GPIB interface converter |
|
|
82357A |
|
| • |
Easy connection to GPIB instruments |
| • |
Use standard USB interface |
| • |
Interface with up to 14 GPIB instruments |
| • |
Transfer over 750Kbytes/sec for large block transfers |
|
| Agilent
81134A Pulse Pattern Generator
- 15 MHz to 3.35 GHz, 2 channel |
|
|
81134A |
|
| • |
Required for receiver test only |
| • |
Low jitter |
| • |
Fast rise times (20%-80%) < 60 ps |
| • |
Variable cross-over point (eye deformation) |
|
| Agilent
15433B
- Transition Time Converter |
|
|
15433B |
|
| • |
For use with 81134A |
| • |
Output Transition Time: 500 ps |
| • |
3 dB point: 640 MHz |
|
| Agilent
86100 Series
- Infiniium DCA Oscilloscope Mainframes |
|
|
86100A
86100B
86100C |
|
| • |
TDR test recommended when at development stage |
| • |
Required accessories:
54745A Differential TDR/TDT module
2 male SMA cables |
|
|
Additional Required Equipment
- Test Bed Computer, Cables and Electrical Test Tool |
|
|
Test Bed Computer
USB Cables
USB-IF Tool
on Host System |
|
| See www.usb.org for qualified vendors for the following: |
| • |
HS USB Test Bed Computer:
815EEA2 motherboard
Pentium III 700 MHz
256 MB ram
40 GB HD
CD (CD-RW), FD
IOGear (or ATEN)
USB 2.0 PCI card (5-port)
Windows 2000 or XP |
| • |
(1) 1.5 meter and (1) 1 meter USB cables |
| • |
HS Electrical Test Tool (USBHSET.exe) |
|
|
| Image |
|
Models |
|
Product Highlights |
| Agilent
DSO80000B Series Infiniium Oscilloscopes
- 2 to 6 GHz Bandwidth, Up to 40 GSa/s, 4 Channels |
|
|
|
DSO80204B
DSO80304B
DSO80404B
DSO80604B
|
|
| • |
Industry's only bandwidth upgradeable series |
| • |
Up to 2 Mpts MegaZoom deep memory upgrades |
| • |
Industry's lowest noise floor: 241 uV @ 5 mV/div |
| • |
Trigger jitter less than 500 fs rms |
| • |
Industry's largest set of software applications |
| • |
Option 005 (noise reduction) recommended |
|
| Agilent
8000 Series Infiniium Oscilloscopes
- 600 MHz and 1 GHz BW, 4 GSa/s, 4 Channels |
|
|
DSO8064A
DSO8104A
|
|
| • |
Up to 128 Mpts of industry-leading deep memory |
| • |
High-definition color display system with XGA resolution and 256 levels of intensity |
| • |
LAN, GPIB, RS-232, Parallel, PS/2, USB 2.0 and Video all standard |
|
| Agilent
N5416A
- USB 2.0 Compliance Test Software |
|
|
|
N5416A |
|
| • |
Recognized by the USB-IF for official compliance testing |
| • |
New setup wizard for fast setup, configuration and test |
| • |
USB-IF MATLAB® script execution inside the Infiniium oscilloscope |
| • |
Compatible with Infiniium 8000, 80000 and 54850 Series |
| • |
4 or 4+16 Channel scopes required |
|
| Agilent
E2646A
- Low/Full Speed USB 2.0 SQiDD Test Fixture |
|
|
|
E2646A |
|
| • |
SQiDD: Signal Quality Inrush, Drop/Droop |
|
| Agilent
10073C Passive Probe
- 500 MHz |
|
|
10073C |
|
| • |
Not required if purchasing E2697A |
| • |
Quantity 3 required |
| • |
10:1 attenuation ratio |
| • |
2.2 M ohm input impedance |
|
| Agilent
E2697A
- High-impedance adapter |
|
|
E2697A
|
|
| • |
High-impedance probe adapter with one 10073C passive probe |
| • |
Quantity 3 required |
| • |
Switchable ac/dc coupling |
| • |
10:1 and 1:1 attenuation settings |
|
| Agilent
10075A
- Clip adapter |
|
|
10075A
|
|
| • |
Clip Adapter (for each E2697A) |
| • |
Quantity 3 required |
| • |
Smallest in the industry to date |
|
| Agilent
1147A
- 50 MHz Current Probe |
|
|
1147A
|
|
| • |
Use with 8000 Series oscilloscopes |
| • |
Wide bandwidth: DC to 50MHz |
| • |
Low noise (< 2.5 mA rms) |
|
| Agilent
N2774/75A
- 50 MHz Current Probe and Power Supply |
|
|
N2774A
N2775A |
|
| • |
Use with 80000 Series oscilloscopes |
| • |
Wide bandwidth: DC to 50MHz |
| • |
Low noise (< 2.5 mA rms) |
|
| Agilent
Digital Multimeters
- 6˝ Digit High Performance |
|
|
|
34410A
34411A |
|
| • |
34410A: 10,000 readings/sec @ 5 1/2 digits |
| • |
34411A: 50,000 readings/sec @ 4 1/2 digits |
| • |
LAN, USB, & GPIB standard |
| • |
Capacitance & temperature measurements |
|
|
Additional Required Equipment |
|
|
High-speed hubs
Adjacent Devices
Test Bed Computer
USB Cables
USB-IF Tool on Host System |
|
| See www.usb.org for qualified vendors for the following: |
| • |
(5) Certified High Speed hubs |
| • |
Adjacent Devices: Intel Deluxe PC Camera (for full-speed), USB Mouse (for low-speed) |
| • |
HS USB Test Bed Computer:
815EEA2 motherboard
Pentium III 700 MHz
256 MB ram
40 GB HD
CD (CD-RW), FD
IOGear (or ATEN)
USB 2.0 PCI card (5-port)
Windows 2000 or XP |
| • |
(6) 5 meter and (1) 1 meter USB cables |
| • |
HS Electrical Test Tool (USBHSET.exe) |
|
|
MetricTest
Solutions
