| Image |
 |
Models |
|
Product Highlights |
| Agilent 90000 Series Infiniium Oscilloscopes - 2.5 to 6 GHz Bandwidth, Up to 40 GSa/s, 4 Channels |
 |
|
DSO90254A
DSA90254A
|
|
| Infiniium 90000A continues to provide the industry leading lowest noise floor with measurement stability and repeatability. Ultra responsive 1 Gpts deep memory (optional) and industry’s only 3-step hardware and software integrated trigger solution “InfiniiScan Plus” provides next generation debugging and analysis solution. Infiniium DSO90000A provides a complete view of your design. |
| • |
- 2.5 to 13 GHz bandwidth |
| • |
- 20 GSa/s on each of 4 analog channels (40 GSa/s for DSO90804A and above). |
| • |
- 12.1” XGA touch screen |
|
| Agilent 9000 Series Infiniium Oscilloscopes - 1 to 4 GHz Bandwidth, Up to 20 GSa/s, 4 Channels and MSO |
|
|
DSO9104A
DSO9254A |
|
| Agilent’s Infiniium DSO9254A, equipped with a 15” XGA display, comes in a package that is just 9” (23 cm) deep and weighs only 26 pounds (11.8 kg) to preserve your limited bench space. This scope is engineered to give you the broadest measurement capability available to meet your needs both today and in the future. Add 16 integrated digital channels with the MSO9254A.Take advantage of optional integrated protocol viewers to quickly isolate physical layer issues causing errors. Customize your toolset with our debug and compliance packages to tailor the scope to your needs. |
| • |
2.5 GHz bandwidth |
| • |
4 analog channels |
| • |
20 GSa/s max. sample rate |
| • |
Standard 10 Mpts memory per channel, upgradeable to 1 Gpts
|
|
| Agilent DSO80000B Series Infiniium Oscilloscopes - 2 to 6 GHz Bandwidth, Up to 40 GSa/s, 4 Channels |
 |
|
DSO80204B
DSO80304B
DSO80404B
DSO80604B
|
|
| • |
Industry's only bandwidth upgradeable series |
| • |
Up to 2 Mpts MegaZoom deep memory upgrades |
| • |
Industry's lowest noise floor: 241 uV @ 5 mV/div |
| • |
Trigger jitter less than 500 fs rms |
| • |
Industry's largest set of software applications |
| • |
Option 005 (noise reduction) recommended |
|
| Agilent
N5416A - USB 2.0 Compliance Test Software |
 |
|
N5416A |
|
| • |
Recognized by the USB-IF for official compliance testing |
| • |
New setup wizard for fast setup, configuration and test |
| • |
USB-IF MATLAB® script execution inside the Infiniium oscilloscope |
| • |
Compatible with Infiniium 8000, 80000 and 54850 Series |
| • |
4 or 4+16 Channel scopes required |
|
| Agilent
E2649A
- USB 2.0 High Speed Fixture Set |
 |
|
E2649A |
|
| Set contains: |
| • |
Device Signal Quality test fixture |
| • |
Host Signal Quality test fixture |
| • |
Receiver Sensitivity test fixture |
| • |
Device TDR test fixture |
| • |
Host TDR test fixture |
| • |
Host Disconnect test fixture |
| • |
Power supply |
|
| Agilent
1131A
- InfiniiMax probe amplifier |
 |
|
1131A |
|
| • |
3.5 GHz Bandwidth |
| • |
Higher bandwidth Infiniimax probes can also be used |
| • |
2 required for hub testing |
| • |
Additional kit of 10 damped adapters required
(See Agilent for model # 01131-68703) |
|
| Agilent
E2678A
- InfiniiMax differential socketed probe head |
 |
|
E2678A |
|
| • |
Use with InfiniiMax probe amplifiers |
| • |
2 required for hub testing |
|
| Agilent
Digital Multimeters
- 6˝ Digit High Performance |
 |
 |
34410A
34411A |
|
| • |
34410A: 10,000 readings/sec @ 5 1/2 digits |
| • |
34411A: 50,000 readings/sec @ 4 1/2 digits |
| • |
LAN, USB, & GPIB standard |
| • |
Capacitance & temperature measurements |
|
| Agilent
82357A
- USB to GPIB interface converter |
 |
|
82357A |
|
| • |
Easy connection to GPIB instruments |
| • |
Use standard USB interface |
| • |
Interface with up to 14 GPIB instruments |
| • |
Transfer over 750Kbytes/sec for large block transfers |
|
| Agilent
81134A Pulse Pattern Generator
- 15 MHz to 3.35 GHz, 2 channel |
 |
|
81134A |
|
| • |
Required for receiver test only |
| • |
Low jitter |
| • |
Fast rise times (20%-80%) < 60 ps |
| • |
Variable cross-over point (eye deformation) |
|
| Agilent
15433B
- Transition Time Converter |
 |
|
15433B |
|
| • |
For use with 81134A |
| • |
Output Transition Time: 500 ps |
| • |
3 dB point: 640 MHz |
|
| Agilent
86100 Series
- Infiniium DCA Oscilloscope Mainframes |
 |
|
86100A
86100B
86100C |
|
| • |
TDR test recommended when at development stage |
| • |
Required accessories:
54745A Differential TDR/TDT module
2 male SMA cables |
|
|
Additional Required Equipment
- Test Bed Computer, Cables and Electrical Test Tool |
 |
|
Test Bed Computer
USB Cables
USB-IF Tool
on Host System |
|
| See www.usb.org for qualified vendors for the following: |
| • |
HS USB Test Bed Computer:
815EEA2 motherboard
Pentium III 700 MHz
256 MB ram
40 GB HD
CD (CD-RW), FD
IOGear (or ATEN)
USB 2.0 PCI card (5-port)
Windows 2000 or XP |
| • |
(1) 1.5 meter and (1) 1 meter USB cables |
| • |
HS Electrical Test Tool (USBHSET.exe) |
|
|
| Image |
|
Models |
|
Product Highlights |
| Agilent 9000 Series Infiniium Oscilloscopes |
 |
|
DSO9104A
DSO9254A
|
|
| Agilent’s Infiniium DSO9254A, equipped with a 15” XGA display, comes in a package that is just 9” (23 cm) deep and weighs only 26 pounds (11.8 kg) to preserve your limited bench space. This scope is engineered to give you the broadest measurement capability available to meet your needs both today and in the future. Add 16 integrated digital channels with the MSO9254A.Take advantage of optional integrated protocol viewers to quickly isolate physical layer issues causing errors. Customize your toolset with our debug and compliance packages to tailor the scope to your needs. |
| • |
2.5 GHz bandwidth |
| • |
4 analog channels |
| • |
20 GSa/s max. sample rate |
| • |
Standard 10 Mpts memory per channel, upgradeable to 1 Gpts |
| |
|
|
| Agilent
8000 Series Infiniium Oscilloscopes - 600 MHz and 1 GHz BW, 4 GSa/s, 4 Channels |
 |
|
DSO8064A
DSO8104A |
|
| • |
Up to 128 Mpts of industry-leading deep memory |
| • |
High-definition color display system with XGA resolution and 256 levels of intensity |
| • |
LAN, GPIB, RS-232, Parallel, PS/2, USB 2.0 and Video all standard |
|
| Agilent
N5416A
- USB 2.0 Compliance Test Software |
 |
|
N5416A |
|
| • |
Recognized by the USB-IF for official compliance testing |
| • |
New setup wizard for fast setup, configuration and test |
| • |
USB-IF MATLAB® script execution inside the Infiniium oscilloscope |
| • |
Compatible with Infiniium 8000, 80000 and 54850 Series |
| • |
4 or 4+16 Channel scopes required |
|
| Agilent
E2646A
- Low/Full Speed USB 2.0 SQiDD Test Fixture |
| |
|
E2646A |
|
| • |
SQiDD: Signal Quality Inrush, Drop/Droop |
|
| Agilent
10073C Passive Probe
- 500 MHz |
 |
|
10073C |
|
| • |
Not required if purchasing E2697A |
| • |
Quantity 3 required |
| • |
10:1 attenuation ratio |
| • |
2.2 M ohm input impedance |
|
| Agilent
E2697A
- High-impedance adapter |
 |
|
E2697A
|
|
| • |
High-impedance probe adapter with one 10073C passive probe |
| • |
Quantity 3 required |
| • |
Switchable ac/dc coupling |
| • |
10:1 and 1:1 attenuation settings |
|
| Agilent
10075A
- Clip adapter |
 |
|
10075A
|
|
| • |
Clip Adapter (for each E2697A) |
| • |
Quantity 3 required |
| • |
Smallest in the industry to date |
|
| Agilent
1147A
- 50 MHz Current Probe |
 |
|
1147A
|
|
| • |
Use with 8000 Series oscilloscopes |
| • |
Wide bandwidth: DC to 50MHz |
| • |
Low noise (< 2.5 mA rms) |
|
| Agilent
N2774/75A
- 50 MHz Current Probe and Power Supply |
 |
|
N2774A
N2775A |
|
| • |
Use with 80000 Series oscilloscopes |
| • |
Wide bandwidth: DC to 50MHz |
| • |
Low noise (< 2.5 mA rms) |
|
| Agilent
Digital Multimeters
- 6˝ Digit High Performance |
| |
|
34410A
34411A |
|
| • |
34410A: 10,000 readings/sec @ 5 1/2 digits |
| • |
34411A: 50,000 readings/sec @ 4 1/2 digits |
| • |
LAN, USB, & GPIB standard |
| • |
Capacitance & temperature measurements |
|
|
Additional Required Equipment |
 |
|
High-speed hubs
Adjacent Devices
Test Bed Computer
USB Cables
USB-IF Tool on Host System |
|
| See www.usb.org for qualified vendors for the following: |
| • |
(5) Certified High Speed hubs |
| • |
Adjacent Devices: Intel Deluxe PC Camera (for full-speed), USB Mouse (for low-speed) |
| • |
HS USB Test Bed Computer:
815EEA2 motherboard
Pentium III 700 MHz
256 MB ram
40 GB HD
CD (CD-RW), FD
IOGear (or ATEN)
USB 2.0 PCI card (5-port)
Windows 2000 or XP |
| • |
(6) 5 meter and (1) 1 meter USB cables |
| • |
HS Electrical Test Tool (USBHSET.exe) |
|
|
MetricTest
Solutions
